// Copyright (C) 2024, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
# include "Interfaces.h"
# include "ROM.h"
# ifndef BOARDS_H
# define BOARDS_H
# define PLATFORM_ESP32 0x80
# define PLATFORM_NRF52 0x70
# define MCU_ESP32 0x81
# define MCU_NRF52 0x71
// Products, boards and models. Grouped by manufacturer.
// Below are the original RNodes, sold by Mark Qvist.
# define PRODUCT_RNODE 0x03 // RNode devices
# define BOARD_RNODE 0x31 // Original v1.0 RNode
# define MODEL_A4 0xA4 // RNode v1.0, 433 MHz
# define MODEL_A9 0xA9 // RNode v1.0, 868 MHz
# define BOARD_RNODE_NG_20 0x40 // RNode hardware revision v2.0
# define MODEL_A3 0xA3 // RNode v2.0, 433 MHz
# define MODEL_A8 0xA8 // RNode v2.0, 868 MHz
# define BOARD_RNODE_NG_21 0x41 // RNode hardware revision v2.1
# define MODEL_A2 0xA2 // RNode v2.1, 433 MHz
# define MODEL_A7 0xA7 // RNode v2.1, 868 MHz
# define BOARD_T3S3 0x42 // T3S3 devices
# define MODEL_A1 0xA1 // T3S3, 433 MHz with SX1268
# define MODEL_A5 0xA5 // T3S3, 433 MHz with SX1278
# define MODEL_A6 0xA6 // T3S3, 868 MHz with SX1262
# define MODEL_AA 0xAA // T3S3, 868 MHz with SX1276
# define MODEL_AC 0xAC // T3S3, 2.4 GHz with SX1280 and PA
# define PRODUCT_TBEAM 0xE0 // T-Beam devices
# define BOARD_TBEAM 0x33
# define MODEL_E4 0xE4 // T-Beam SX1278, 433 Mhz
# define MODEL_E9 0xE9 // T-Beam SX1276, 868 Mhz
# define MODEL_E3 0xE3 // T-Beam SX1268, 433 Mhz
# define MODEL_E8 0xE8 // T-Beam SX1262, 868 Mhz
# define PRODUCT_TDECK_V1 0xD0 // T-Deck - sold by LilyGO
# define BOARD_TDECK 0x3B
# define MODEL_D4 0xD4 // LilyGO T-Deck, 433 MHz
# define MODEL_D9 0xD9 // LilyGO T-Deck, 868 MHz
# define PRODUCT_TBEAM_S_V1 0xEA // T-Beam Supreme - sold by LilyGO
# define BOARD_TBEAM_S_V1 0x3D
# define MODEL_DB 0xDB // LilyGO T-Beam Supreme, 433 MHz
# define MODEL_DC 0xDC // LilyGO T-Beam Supreme, 868 MHz
# define PRODUCT_T32_10 0xB2 // T3 v1.0 - sold by LilyGO
# define BOARD_LORA32_V1_0 0x39
# define MODEL_BA 0xBA // LilyGO T3 v1.0, 433 MHz
# define MODEL_BB 0xBB // LilyGO T3 v1.0, 868 MHz
# define PRODUCT_T32_20 0xB0 // T3 v2.0 - sold by LilyGO
# define BOARD_LORA32_V2_0 0x36
# define MODEL_B3 0xB3 // LilyGO T3 v2.0, 433 MHz
# define MODEL_B8 0xB8 // LilyGO T3 v2.0, 868 MHz
# define PRODUCT_T32_21 0xB1
# define BOARD_LORA32_V2_1 0x37
# define MODEL_B4 0xB4 // LilyGO T3 v2.1, 433 MHz
# define MODEL_B9 0xB9 // LilyGO T3 v2.1, 868 MHz
# define PRODUCT_H32_V2 0xC0 // Board code 0x38
# define BOARD_HELTEC32_V2 0x38
# define MODEL_C4 0xC4 // Heltec Lora32 v2, 433 MHz
# define MODEL_C9 0xC9 // Heltec Lora32 v2, 868 MHz
# define PRODUCT_H32_V3 0xC1
# define BOARD_HELTEC32_V3 0x3A
# define MODEL_C5 0xC5 // Heltec Lora32 v3, 433 MHz
# define MODEL_CA 0xCA // Heltec Lora32 v3, 868 MHz
# define PRODUCT_H_W_PAPER 0xC3
# define BOARD_H_W_PAPER 0x3E
# define MODEL_C8 0xC8
# define PRODUCT_RAK4631 0x10 // RAK4631 - sold by RAKWireless
# define BOARD_RAK4631 0x51
# define MODEL_11 0x11 // RAK4631, 433 MHz
# define MODEL_12 0x12 // RAK4631, 868 MHz
# define MODEL_13 0x13 // RAK4631, 433MHz with WisBlock SX1280 module (LIBSYS002)
# define MODEL_14 0x14 // RAK4631, 868/915 MHz with WisBlock SX1280 module (LIBSYS002)
# define PRODUCT_OPENCOM_XL 0x20 // openCom XL - sold by Liberated Embedded Systems
# define BOARD_OPENCOM_XL 0x52
# define MODEL_21 0x21 // openCom XL, 868/915 MHz
# define BOARD_E22_ESP32 0x45 // Custom Ebyte E22 board design for meshtastic, source:
// https://github.com/NanoVHF/Meshtastic-DIY/blob/main/Schematics/E-Byte_E22/Mesh_Ebyte_E22-XXXM30S.pdf
# define PRODUCT_HELTEC_T114 0xC2 // Heltec Mesh Node T114
# define BOARD_HELTEC_T114 0x3C
# define MODEL_C6 0xC6 // Heltec Mesh Node T114, 470-510 MHz
# define MODEL_C7 0xC7 // Heltec Mesh Node T114, 863-928 MHz
# define PRODUCT_TECHO 0x15 // LilyGO T-Echo devices
# define BOARD_TECHO 0x44
# define MODEL_16 0x16 // T-Echo 433 MHz
# define MODEL_17 0x17 // T-Echo 868/915 MHz
# define PRODUCT_HMBRW 0xF0
# define BOARD_HMBRW 0x32
# define BOARD_HUZZAH32 0x34
# define BOARD_GENERIC_ESP32 0x35
# define BOARD_GENERIC_NRF52 0x50
# define MODEL_FE 0xFE // Homebrew board, max 17dBm output power
# define MODEL_FF 0xFF // Homebrew board, max 14dBm output power
// Displays
# define OLED 0x01
# define EINK_BW 0x02
# define EINK_3C 0x03
# define MONO_OLED 0x04
# define TFT 0x05
# define ADAFRUIT_TFT 0x06
# if defined(ESP32)
# define PLATFORM PLATFORM_ESP32
# define MCU_VARIANT MCU_ESP32
# elif defined(NRF52840_XXAA) || defined(_VARIANT_PCA10056_)
# include <variant.h>
# define PLATFORM PLATFORM_NRF52
# define MCU_VARIANT MCU_NRF52
# else
# error "The firmware cannot be compiled for the selected MCU variant"
# endif
# define HAS_DISPLAY false
# define HAS_BLUETOOTH false
# define HAS_BLE false
# define HAS_TCXO false
# define HAS_PMU false
# define HAS_NP false
# define HAS_EEPROM false
# define HAS_INPUT false
# define HAS_SLEEP false
# define PIN_DISP_SLEEP -1
# define VALIDATE_FIRMWARE true
# if defined(ENABLE_TCXO)
# define HAS_TCXO true
# endif
# if MCU_VARIANT == MCU_ESP32
// Board models for ESP32 based builds are
// defined by the build target in the makefile.
// If you are not using make to compile this
// firmware, you can manually define model here.
//
// #define BOARD_MODEL BOARD_GENERIC_ESP32
# define CONFIG_UART_BUFFER_SIZE 6144
# define CONFIG_QUEUE_0_SIZE 6144
# define CONFIG_QUEUE_MAX_LENGTH 200
# define EEPROM_SIZE 1024
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# define GPS_BAUD_RATE 9600
# define PIN_GPS_TX 12
# define PIN_GPS_RX 34
# if BOARD_MODEL == BOARD_GENERIC_ESP32
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
const int pin_led_rx = 14 ;
const int pin_led_tx = 32 ;
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX127X } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX127X
{
4 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
39 , // pin_dio
36 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_TBEAM
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_PMU true
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_SD false
# define HAS_EEPROM true
# define I2C_SDA 21
# define I2C_SCL 22
# define PMU_IRQ 35
# define INTERFACE_COUNT 1
# define HAS_INPUT true
const int pin_btn_usr1 = 38 ;
const int pin_led_rx = 2 ;
const int pin_led_tx = 4 ;
# if BOARD_VARIANT == MODEL_E4 || BOARD_VARIANT == MODEL_E9
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX127X } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX127X
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
26 , // pin_dio
23 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_VARIANT == MODEL_E3 || BOARD_VARIANT == MODEL_E8
# define OCP_TUNED 0x38
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
true , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
32 , // pin_busy
33 , // pin_dio
23 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# endif
# elif BOARD_MODEL == BOARD_HUZZAH32
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
const int pin_led_rx = 14 ;
const int pin_led_tx = 32 ;
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX127X } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
4 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
39 , // pin_dio
36 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_LORA32_V1_0
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
const int pin_cs = 18 ;
const int pin_reset = 14 ;
const int pin_dio = 26 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 25 ;
const int pin_led_tx = 2 ;
# else
const int pin_led_rx = 2 ;
const int pin_led_tx = 2 ;
# endif
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1276 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1276
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1276
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
26 , // pin_dio
14 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_LORA32_V2_0
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
const int pin_cs = 18 ;
const int pin_reset = 12 ;
const int pin_dio = 26 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2 ;
const int pin_led_tx = 0 ;
# else
const int pin_led_rx = 22 ;
const int pin_led_tx = 22 ;
# endif
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX127X } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX127X
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
26 , // pin_dio
14 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_LORA32_V2_1
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH true
# define HAS_PMU true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1276 } ;
# if HAS_TCXO == true
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
true , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX127X
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
26 , // pin_dio
23 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
33 // pin_tcxo_enable
}
} ;
# endif
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 15 ;
const int pin_led_tx = 4 ;
# else
const int pin_led_rx = 25 ;
const int pin_led_tx = 25 ;
# endif
# if HAS_TCXO == false
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX127X
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
26 , // pin_dio
23 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# endif
# elif BOARD_MODEL == BOARD_HELTEC32_V2
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
# define HAS_INPUT true
# define HAS_SLEEP true
# define PIN_WAKEUP GPIO_NUM_0
# define WAKEUP_LEVEL 0
const int pin_btn_usr1 = 0 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 36 ;
const int pin_led_tx = 37 ;
# else
const int pin_led_rx = 25 ;
const int pin_led_tx = 25 ;
# endif
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX127X } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX127X
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
26 , // pin_dio
14 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_HELTEC32_V3
# define IS_ESP32S3 true
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_PMU true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define HAS_INPUT true
# define HAS_SLEEP true
# define PIN_WAKEUP GPIO_NUM_0
# define WAKEUP_LEVEL 0
# define INTERFACE_COUNT 1
# define OCP_TUNED 0x38
const int pin_btn_usr1 = 0 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13 ;
const int pin_led_tx = 14 ;
# else
const int pin_led_rx = 35 ;
const int pin_led_tx = 35 ;
# endif
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
true , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
8 , // pin_ss
9 , // pin_sclk
10 , // pin_mosi
11 , // pin_miso
13 , // pin_busy
14 , // pin_dio
12 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_H_W_PAPER
// Heltec Wireless Paper. Basically the Heltec LoRa32 v3 with an eink display.
// TODO, need to confirm that the display is a 213BN
# define IS_ESP32S3 true
# define HAS_DISPLAY true
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_PMU true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define HAS_INPUT true
# define HAS_SLEEP true
# define HAS_DISPLAY true
# define DISPLAY EINK_BW
# define DISPLAY_SCALE_OVERRIDE true
# define DISPLAY_SCALE 1.90625
# define DISPLAY_MODEL GxEPD2_213_BN
# define PIN_WAKEUP GPIO_NUM_0
# define WAKEUP_LEVEL 0
# define INTERFACE_COUNT 1
# define OCP_TUNED 0x38
const int pin_btn_usr1 = 0 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13 ;
const int pin_led_tx = 14 ;
# else
const int pin_led_rx = 35 ;
const int pin_led_tx = 35 ;
# endif
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
true , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
8 , // pin_ss
9 , // pin_sclk
10 , // pin_mosi
11 , // pin_miso
13 , // pin_busy
14 , // pin_dio
12 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
const int pin_disp_cs = 4 ;
const int pin_disp_dc = 5 ;
const int pin_disp_reset = 6 ;
const int pin_disp_busy = 7 ;
const int pin_disp_en = 45 ;
# elif BOARD_MODEL == BOARD_RNODE_NG_20
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH true
# define HAS_NP true
# define HAS_CONSOLE true
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
const int pin_cs = 18 ;
const int pin_reset = 12 ;
const int pin_dio = 26 ;
const int pin_np = 4 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2 ;
const int pin_led_tx = 0 ;
# else
const int pin_led_rx = 22 ;
const int pin_led_tx = 22 ;
# endif
# endif
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1276 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1276
{
false , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
} ;
const uint8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1276
{
8 , // pin_ss
9 , // pin_sclk
10 , // pin_mosi
11 , // pin_miso
13 , // pin_busy
14 , // pin_dio
12 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_RNODE_NG_21
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_PMU true
# define HAS_NP true
# define HAS_SD false
# define HAS_EEPROM true
# define INTERFACE_COUNT 1
const int pin_np = 12 ;
const int pin_dac = 25 ;
const int pin_adc = 34 ;
const int SD_MISO = 2 ;
const int SD_MOSI = 15 ;
const int SD_CLK = 14 ;
const int SD_CS = 13 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 12 ;
const int pin_led_tx = 4 ;
# else
const int pin_led_rx = 25 ;
const int pin_led_tx = 25 ;
# endif
# endif
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX127X } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX127X
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const uint8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX127X
{
18 , // pin_ss
- 1 , // pin_sclk
- 1 , // pin_mosi
- 1 , // pin_miso
- 1 , // pin_busy
26 , // pin_dio
23 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
// todo ce-ise all boards below here
# elif BOARD_MODEL == BOARD_T3S3
# define IS_ESP32S3 true
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_CONSOLE true
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_PMU true
# define HAS_NP false
# define HAS_SD false
# define HAS_EEPROM true
# define HAS_INPUT true
# define HAS_SLEEP true
# define PIN_WAKEUP GPIO_NUM_0
# define WAKEUP_LEVEL 0
# define INTERFACE_COUNT 1
const int pin_btn_usr1 = 0 ;
# if BOARD_VARIANT == MODEL_A1
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
false , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
} ;
const uint8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
7 , // pin_ss
5 , // pin_sclk
6 , // pin_mosi
3 , // pin_miso
34 , // pin_busy
33 , // pin_dio
8 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_VARIANT == MODEL_AC // SX1280 with PA
//#define CONFIG_UART_BUFFER_SIZE 40000
//#define CONFIG_QUEUE_0_SIZE 40000
# define CONFIG_QUEUE_0_SIZE 6144
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1280 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1280
{
false , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const uint8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1280
{
7 , // pin_ss
5 , // pin_sclk
6 , // pin_mosi
3 , // pin_miso
36 , // pin_busy
9 , // pin_dio
8 , // pin_reset
10 , // pin_txen
21 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# endif
const int pin_np = 38 ;
const int pin_dac = 25 ;
const int pin_adc = 1 ;
const int SD_MISO = 2 ;
const int SD_MOSI = 11 ;
const int SD_CLK = 14 ;
const int SD_CS = 13 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 37 ;
const int pin_led_tx = 37 ;
# else
const int pin_led_rx = 37 ;
const int pin_led_tx = 37 ;
# endif
# endif
# elif BOARD_MODEL == BOARD_TDECK
# define IS_ESP32S3 true
# define MODEM SX1262
# define DIO2_AS_RF_SWITCH true
# define HAS_BUSY true
# define HAS_TCXO true
# define HAS_DISPLAY false
const int pin_poweron = 10 ;
const int pin_btn_usr1 = 0 ;
const int pin_cs = 9 ;
const int pin_reset = 17 ;
const int pin_sclk = 40 ;
const int pin_mosi = 41 ;
const int pin_miso = 38 ;
const int pin_tcxo_enable = - 1 ;
const int pin_dio = 45 ;
const int pin_busy = 13 ;
const int SD_MISO = 38 ;
const int SD_MOSI = 41 ;
const int SD_CLK = 40 ;
const int SD_CS = 39 ;
const int DISPLAY_DC = 11 ;
const int DISPLAY_CS = 12 ;
const int DISPLAY_MISO = 38 ;
const int DISPLAY_MOSI = 41 ;
const int DISPLAY_CLK = 40 ;
const int DISPLAY_BL_PIN = 42 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# else
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# endif
# endif
# elif BOARD_MODEL == BOARD_TBEAM_S_V1
# define IS_ESP32S3 true
# define MODEM SX1262
# define DIO2_AS_RF_SWITCH true
# define HAS_BUSY true
# define HAS_TCXO true
# define OCP_TUNED 0x38
# define HAS_DISPLAY true
# define HAS_CONSOLE true
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_PMU true
# define HAS_NP false
# define HAS_SD false
# define HAS_EEPROM true
# define HAS_INPUT true
# define HAS_SLEEP false
# define PMU_IRQ 40
# define I2C_SCL 41
# define I2C_SDA 42
const int pin_btn_usr1 = 0 ;
const int pin_cs = 10 ;
const int pin_reset = 5 ;
const int pin_sclk = 12 ;
const int pin_mosi = 11 ;
const int pin_miso = 13 ;
const int pin_tcxo_enable = - 1 ;
const int pin_dio = 1 ;
const int pin_busy = 4 ;
const int SD_MISO = 37 ;
const int SD_MOSI = 35 ;
const int SD_CLK = 36 ;
const int SD_CS = 47 ;
const int IMU_CS = 34 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# else
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# endif
# endif
# if BOARD_VARIANT == MODEL_A1
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
false , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
} ;
const uint8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
7 , // pin_ss
5 , // pin_sclk
6 , // pin_mosi
3 , // pin_miso
34 , // pin_busy
33 , // pin_dio
8 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_VARIANT == MODEL_AC // SX1280 with PA
# define CONFIG_UART_BUFFER_SIZE 40000
# define CONFIG_QUEUE_0_SIZE 40000
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1280 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1280
{
false , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
} ,
} ;
const uint8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1280
{
7 , // pin_ss
5 , // pin_sclk
6 , // pin_mosi
3 , // pin_miso
36 , // pin_busy
9 , // pin_dio
8 , // pin_reset
10 , // pin_txen
21 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# endif
# elif BOARD_MODEL == BOARD_E22_ESP32
# define HAS_DISPLAY true
# define DISPLAY OLED
# define HAS_BLUETOOTH true
# define HAS_BLE true
# define HAS_CONSOLE true
# define HAS_SD false
# define HAS_EEPROM true
# define I2C_SDA 21
# define I2C_SCL 22
# define INTERFACE_COUNT 1
const int pin_led_rx = 2 ;
const int pin_led_tx = 4 ;
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
true , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
18 , // pin_ss
5 , // pin_sclk
27 , // pin_mosi
19 , // pin_miso
32 , // pin_busy
33 , // pin_dio
23 , // pin_reset
- 1 , // pin_txen
14 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_MODEL == BOARD_TDECK
# define IS_ESP32S3 true
# define MODEM SX1262
# define DIO2_AS_RF_SWITCH true
# define HAS_BUSY true
# define HAS_TCXO true
# define HAS_DISPLAY false
# define HAS_CONSOLE false
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_PMU true
# define HAS_NP false
# define HAS_SD false
# define HAS_EEPROM true
# define HAS_INPUT true
# define HAS_SLEEP true
# define PIN_WAKEUP GPIO_NUM_0
# define WAKEUP_LEVEL 0
const int pin_poweron = 10 ;
const int pin_btn_usr1 = 0 ;
const int pin_cs = 9 ;
const int pin_reset = 17 ;
const int pin_sclk = 40 ;
const int pin_mosi = 41 ;
const int pin_miso = 38 ;
const int pin_tcxo_enable = - 1 ;
const int pin_dio = 45 ;
const int pin_busy = 13 ;
const int SD_MISO = 38 ;
const int SD_MOSI = 41 ;
const int SD_CLK = 40 ;
const int SD_CS = 39 ;
const int DISPLAY_DC = 11 ;
const int DISPLAY_CS = 12 ;
const int DISPLAY_MISO = 38 ;
const int DISPLAY_MOSI = 41 ;
const int DISPLAY_CLK = 40 ;
const int DISPLAY_BL_PIN = 42 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# else
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# endif
# endif
# elif BOARD_MODEL == BOARD_TBEAM_S_V1
# define IS_ESP32S3 true
# define MODEM SX1262
# define DIO2_AS_RF_SWITCH true
# define HAS_BUSY true
# define HAS_TCXO true
# define HAS_DISPLAY true
# define HAS_CONSOLE true
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_PMU true
# define HAS_NP false
# define HAS_SD false
# define HAS_EEPROM true
# define HAS_INPUT true
# define HAS_SLEEP false
# define PMU_IRQ 40
# define I2C_SCL 41
# define I2C_SDA 42
const int pin_btn_usr1 = 0 ;
const int pin_cs = 10 ;
const int pin_reset = 5 ;
const int pin_sclk = 12 ;
const int pin_mosi = 11 ;
const int pin_miso = 13 ;
const int pin_tcxo_enable = - 1 ;
const int pin_dio = 1 ;
const int pin_busy = 4 ;
const int SD_MISO = 37 ;
const int SD_MOSI = 35 ;
const int SD_CLK = 36 ;
const int SD_CS = 47 ;
const int IMU_CS = 34 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# else
const int pin_led_rx = 43 ;
const int pin_led_tx = 43 ;
# endif
# endif
# endif
# elif MCU_VARIANT == MCU_NRF52
# if BOARD_MODEL == BOARD_TECHO
# define _PINNUM(port, pin) ((port) * 32 + (pin))
# define HAS_INPUT true
# define EEPROM_SIZE 296
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# define HAS_EEPROM false
# define HAS_SD false
# define HAS_DISPLAY true
# define DISPLAY EINK_BW
# define DISPLAY_MODEL GxEPD2_154_D67
# define BLE_MANUFACTURER "LilyGO"
# define BLE_MODEL "T-Echo"
# define HAS_CONSOLE false
# define HAS_BLE true
# define HAS_PMU true
# define CONFIG_UART_BUFFER_SIZE 32768
# define CONFIG_QUEUE_0_SIZE 6144
# define CONFIG_QUEUE_MAX_LENGTH 200
# define INTERFACE_COUNT 1
//#define I2C_SDA 26
//#define I2C_SCL 27
# define CONFIG_QUEUE_1_SIZE 40000
# define HAS_BACKLIGHT true
// first interface in list is the primary
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
false , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
}
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
24 , // pin_ss
19 , // pin_sclk
22 , // pin_mosi
23 , // pin_miso
17 , // pin_busy
20 , // pin_dio
25 , // pin_reset
- 1 , // pin_txen
- 1 , // pin_rxen
21 // pin_tcxo_enable
}
} ;
const int pin_disp_cs = 30 ;
const int pin_disp_dc = 28 ;
const int pin_disp_reset = 2 ;
const int pin_disp_busy = 3 ;
const int pin_disp_en = 43 ;
const int pin_disp_sck = 31 ;
const int pin_disp_mosi = 29 ;
const int pin_disp_miso = - 1 ;
//#define GPS_BAUD_RATE 115200
//#define PIN_GPS_TX 41
//#define PIN_GPS_RX 40
const int pin_btn_usr1 = _PINNUM ( 1 , 10 ) ;
const int pin_btn_touch = _PINNUM ( 0 , 11 ) ;
const int pin_backlight = 43 ;
# define LED_ON LOW
# define LED_OFF HIGH
# define PIN_LED_GREEN _PINNUM(1, 1)
# define PIN_LED_RED _PINNUM(1, 3)
# define PIN_LED_BLUE _PINNUM(0, 14)
# define PIN_VEXT_EN _PINNUM(0, 12)
const int pin_led_rx = PIN_LED_BLUE ;
const int pin_led_tx = PIN_LED_RED ;
# elif BOARD_MODEL == BOARD_RAK4631 || BOARD_MODEL == BOARD_OPENCOM_XL
# define HAS_EEPROM false
# define HAS_DISPLAY false
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_CONSOLE false
# define HAS_PMU true
# define HAS_NP false
# define HAS_SD false
# define CONFIG_UART_BUFFER_SIZE 6144
# define CONFIG_QUEUE_0_SIZE 6144
# define HAS_INPUT true
# define CONFIG_QUEUE_MAX_LENGTH 200
# define EEPROM_SIZE 296
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# define BLE_MANUFACTURER "RAK Wireless"
# define BLE_MODEL "RAK4640"
# if BOARD_VARIANT == MODEL_11 || BOARD_VARIANT == MODEL_12
# define INTERFACE_COUNT 1
// first interface in list is the primary
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
false , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
}
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
42 , // pin_ss
43 , // pin_sclk
44 , // pin_mosi
45 , // pin_miso
46 , // pin_busy
47 , // pin_dio
38 , // pin_reset
- 1 , // pin_txen
37 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# elif BOARD_VARIANT == MODEL_13 || BOARD_VARIANT == MODEL_14 || BOARD_VARIANT == MODEL_21
# define HAS_DISPLAY true
# define DISPLAY EINK_BW
# define DISPLAY_SCALE_OVERRIDE true
# define DISPLAY_SCALE 1.90625
# define DISPLAY_MODEL GxEPD2_213_BN
# define INTERFACE_COUNT 2
# define CONFIG_QUEUE_1_SIZE 40000
# define CONFIG_UART_BUFFER_SIZE 40000 // \todo, does it have to be this big?
// first interface in list is the primary
const uint8_t interfaces [ INTERFACE_COUNT ] = { SX1262 , SX1280 } ;
const bool interface_cfg [ INTERFACE_COUNT ] [ 3 ] = {
// SX1262
{
false , // DEFAULT_SPI
true , // HAS_TCXO
true // DIO2_AS_RF_SWITCH
} ,
// SX1280
{
true , // DEFAULT_SPI
false , // HAS_TCXO
false // DIO2_AS_RF_SWITCH
}
} ;
const int8_t interface_pins [ INTERFACE_COUNT ] [ 10 ] = {
// SX1262
{
42 , // pin_ss
43 , // pin_sclk
44 , // pin_mosi
45 , // pin_miso
46 , // pin_busy
47 , // pin_dio
38 , // pin_reset
- 1 , // pin_txen
37 , // pin_rxen
- 1 // pin_tcxo_enable
} ,
// SX1280
{
24 , // pin_ss
3 , // pin_sclk
30 , // pin_mosi
29 , // pin_miso
25 , // pin_busy
15 , // pin_dio
16 , // pin_reset
20 , // pin_txen
19 , // pin_rxen
- 1 // pin_tcxo_enable
}
} ;
# endif
const int pin_disp_cs = SS ;
const int pin_disp_dc = WB_IO1 ;
const int pin_disp_reset = - 1 ;
const int pin_disp_busy = WB_IO4 ;
const int pin_disp_en = WB_IO2 ;
const int pin_btn_usr1 = 9 ;
const int pin_led_rx = LED_BLUE ;
const int pin_led_tx = LED_GREEN ;
# elif BOARD_MODEL == BOARD_TECHO
# define _PINNUM(port, pin) ((port) * 32 + (pin))
# define MODEM SX1262
# define HAS_EEPROM false
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_CONSOLE false
# define HAS_PMU true
# define HAS_NP false
# define HAS_SD false
# define HAS_TCXO true
# define HAS_BUSY true
# define HAS_INPUT true
# define HAS_SLEEP true
# define BLE_MANUFACTURER "LilyGO"
# define BLE_MODEL "T-Echo"
# define HAS_INPUT true
# define EEPROM_SIZE 296
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# define CONFIG_UART_BUFFER_SIZE 32768
# define CONFIG_QUEUE_SIZE 6144
# define CONFIG_QUEUE_MAX_LENGTH 200
# define HAS_DISPLAY true
# define DISPLAY EINK_BW
# define HAS_BACKLIGHT true
# define DISPLAY_SCALE 1
# define LED_ON LOW
# define LED_OFF HIGH
# define PIN_LED_GREEN _PINNUM(1, 1)
# define PIN_LED_RED _PINNUM(1, 3)
# define PIN_LED_BLUE _PINNUM(0, 14)
# define PIN_VEXT_EN _PINNUM(0, 12)
const int pin_disp_cs = 30 ;
const int pin_disp_dc = 28 ;
const int pin_disp_reset = 2 ;
const int pin_disp_busy = 3 ;
const int pin_disp_en = - 1 ;
const int pin_disp_sck = 31 ;
const int pin_disp_mosi = 29 ;
const int pin_disp_miso = - 1 ;
const int pin_backlight = 43 ;
const int pin_btn_usr1 = _PINNUM ( 1 , 10 ) ;
const int pin_btn_touch = _PINNUM ( 0 , 11 ) ;
const int pin_reset = 25 ;
const int pin_cs = 24 ;
const int pin_sclk = 19 ;
const int pin_mosi = 22 ;
const int pin_miso = 23 ;
const int pin_busy = 17 ;
const int pin_dio = 20 ;
const int pin_tcxo_enable = 21 ;
const int pin_led_rx = PIN_LED_BLUE ;
const int pin_led_tx = PIN_LED_RED ;
# elif BOARD_MODEL == BOARD_HELTEC_T114
# define MODEM SX1262
# define HAS_EEPROM false
# define HAS_DISPLAY true
# define HAS_BLUETOOTH false
# define HAS_BLE true
# define HAS_CONSOLE false
# define HAS_PMU true
# define HAS_NP true
# define HAS_SD false
# define HAS_TCXO true
# define HAS_BUSY true
# define HAS_INPUT true
# define HAS_SLEEP true
# define DIO2_AS_RF_SWITCH true
# define CONFIG_UART_BUFFER_SIZE 6144
# define CONFIG_QUEUE_SIZE 6144
# define CONFIG_QUEUE_MAX_LENGTH 200
# define EEPROM_SIZE 296
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# define BLE_MANUFACTURER "Heltec"
# define BLE_MODEL "T114"
# define PIN_T114_ADC_EN 6
# define PIN_VEXT_EN 21
// LED
# define LED_T114_GREEN 3
# define PIN_T114_LED 14
# define NP_M 1
const int pin_np = PIN_T114_LED ;
// SPI
# define PIN_T114_MOSI 22
# define PIN_T114_MISO 23
# define PIN_T114_SCK 19
# define PIN_T114_SS 24
// SX1262
# define PIN_T114_RST 25
# define PIN_T114_DIO1 20
# define PIN_T114_BUSY 17
// TFT
# define DISPLAY_SCALE_OVERRIDE true
# define DISPLAY_SCALE 2
# define PIN_T114_TFT_MOSI 9
# define PIN_T114_TFT_MISO 11 // not connected
# define PIN_T114_TFT_SCK 8
# define PIN_T114_TFT_SS 11
# define PIN_T114_TFT_DC 12
# define PIN_T114_TFT_RST 2
# define PIN_T114_TFT_EN 3
# define PIN_T114_TFT_BLGT 15
// pins for buttons on Heltec T114
const int pin_btn_usr1 = 42 ;
// pins for sx1262 on Heltec T114
const int pin_reset = PIN_T114_RST ;
const int pin_cs = PIN_T114_SS ;
const int pin_sclk = PIN_T114_SCK ;
const int pin_mosi = PIN_T114_MOSI ;
const int pin_miso = PIN_T114_MISO ;
const int pin_busy = PIN_T114_BUSY ;
const int pin_dio = PIN_T114_DIO1 ;
const int pin_led_rx = 35 ;
const int pin_led_tx = 35 ;
const int pin_tcxo_enable = - 1 ;
// pins for ST7789 display on Heltec T114
const int DISPLAY_DC = PIN_T114_TFT_DC ;
const int DISPLAY_CS = PIN_T114_TFT_SS ;
const int DISPLAY_MISO = PIN_T114_TFT_MISO ;
const int DISPLAY_MOSI = PIN_T114_TFT_MOSI ;
const int DISPLAY_CLK = PIN_T114_TFT_SCK ;
const int DISPLAY_BL_PIN = PIN_T114_TFT_BLGT ;
const int DISPLAY_RST = PIN_T114_TFT_RST ;
# else
# error An unsupported nRF board was selected. Cannot compile RNode firmware.
# endif
# endif
# ifndef DISPLAY_SCALE
# define DISPLAY_SCALE 1
# endif
# ifndef HAS_BUSY
const int pin_busy = - 1 ;
# endif
# ifndef LED_ON
# define LED_ON HIGH
# endif
# ifndef LED_OFF
# define LED_OFF LOW
# endif
// Default OCP value if not specified
// in board configuration
# ifndef OCP_TUNED
# define OCP_TUNED 0x38
# endif
# ifndef NP_M
# define NP_M 0.15
# endif
# endif
