// Copyright (C) 2024, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
# include "Modem.h"
# ifndef BOARDS_H
# define BOARDS_H
# define PLATFORM_AVR 0x90
# define PLATFORM_ESP32 0x80
# define PLATFORM_NRF52 0x70
# define MCU_1284P 0x91
# define MCU_2560 0x92
# define MCU_ESP32 0x81
# define MCU_NRF52 0x71
# define BOARD_RNODE 0x31
# define BOARD_HMBRW 0x32
# define BOARD_TBEAM 0x33
# define BOARD_HUZZAH32 0x34
# define BOARD_GENERIC_ESP32 0x35
# define BOARD_LORA32_V2_0 0x36
# define BOARD_LORA32_V2_1 0x37
# define BOARD_LORA32_V1_0 0x39
# define BOARD_HELTEC32_V2 0x38
# define BOARD_HELTEC_LORA32_V3 0x3a
# define BOARD_RNODE_NG_20 0x40
# define BOARD_RNODE_NG_21 0x41
# define BOARD_RNODE_NG_22 0x42
# define BOARD_GENERIC_NRF52 0x50
# define BOARD_RAK4630 0x51
// -----------------------------------
// override for local compile
//#define BOARD_MODEL BOARD_LORA32_V1_0
# define BOARD_MODEL BOARD_HELTEC_LORA32_V3
// -----------------------------------
# if defined(__AVR_ATmega1284P__)
# define PLATFORM PLATFORM_AVR
# define MCU_VARIANT MCU_1284P
# elif defined(__AVR_ATmega2560__)
# define PLATFORM PLATFORM_AVR
# define MCU_VARIANT MCU_2560
# elif defined(ESP32)
# define PLATFORM PLATFORM_ESP32
# define MCU_VARIANT MCU_ESP32
# elif defined(NRF52840_XXAA)
# include <variant.h>
# define PLATFORM PLATFORM_NRF52
# define MCU_VARIANT MCU_NRF52
# else
# error "The firmware cannot be compiled for the selected MCU variant"
# endif
# ifndef MODEM
# if BOARD_MODEL == BOARD_RAK4630
# define MODEM SX1262
# elif BOARD_MODEL == BOARD_GENERIC_NRF52
# define MODEM SX1262
# else
# define MODEM SX1276
# endif
# endif
# define HAS_DISPLAY false
# define HAS_BLUETOOTH false
# define HAS_BLE false
# define HAS_TCXO false
# define HAS_PMU false
# define HAS_NP false
# define HAS_EEPROM false
# if defined(ENABLE_TCXO)
# define HAS_TCXO true
# endif
# if MCU_VARIANT == MCU_1284P
const int pin_cs = 4 ;
const int pin_reset = 3 ;
const int pin_dio = 2 ;
const int pin_led_rx = 12 ;
const int pin_led_tx = 13 ;
# define BOARD_MODEL BOARD_RNODE
# define HAS_EEPROM true
# define CONFIG_UART_BUFFER_SIZE 6144
# define CONFIG_QUEUE_SIZE 6144
# define CONFIG_QUEUE_MAX_LENGTH 200
# define EEPROM_SIZE 4096
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# elif MCU_VARIANT == MCU_2560
const int pin_cs = 5 ;
const int pin_reset = 4 ;
const int pin_dio = 2 ;
const int pin_led_rx = 12 ;
const int pin_led_tx = 13 ;
# define BOARD_MODEL BOARD_HMBRW
# define HAS_EEPROM true
# define CONFIG_UART_BUFFER_SIZE 768
# define CONFIG_QUEUE_SIZE 5120
# define CONFIG_QUEUE_MAX_LENGTH 24
# define EEPROM_SIZE 4096
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# elif MCU_VARIANT == MCU_ESP32
// Board models for ESP32 based builds are
// defined by the build target in the makefile.
// If you are not using make to compile this
// firmware, you can manually define model here.
//
// #define BOARD_MODEL BOARD_GENERIC_ESP32
# define CONFIG_UART_BUFFER_SIZE 6144
# define CONFIG_QUEUE_SIZE 6144
# define CONFIG_QUEUE_MAX_LENGTH 200
# define EEPROM_SIZE 1024
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
# define GPS_BAUD_RATE 9600
# define PIN_GPS_TX 12
# define PIN_GPS_RX 34
# if BOARD_MODEL == BOARD_GENERIC_ESP32
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
const int pin_cs = 4 ;
const int pin_reset = 36 ;
const int pin_dio = 39 ;
const int pin_led_rx = 14 ;
const int pin_led_tx = 32 ;
# elif BOARD_MODEL == BOARD_TBEAM
# define HAS_DISPLAY true
# define HAS_PMU true
# define HAS_BLUETOOTH true
# define HAS_BLE true
# define HAS_CONSOLE true
# define HAS_SD false
# define HAS_EEPROM true
# define I2C_SDA 21
# define I2C_SCL 22
# define PMU_IRQ 35
const int pin_cs = 18 ;
const int pin_reset = 23 ;
const int pin_led_rx = 2 ;
const int pin_led_tx = 4 ;
# if MODEM == SX1262
# define HAS_TCXO true
# define HAS_BUSY true
# define DIO2_AS_RF_SWITCH true
const int pin_busy = 32 ;
const int pin_dio = 33 ;
const int pin_tcxo_enable = - 1 ;
# else
const int pin_dio = 26 ;
# endif
# elif BOARD_MODEL == BOARD_HUZZAH32
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
const int pin_cs = 4 ;
const int pin_reset = 36 ;
const int pin_dio = 39 ;
const int pin_led_rx = 14 ;
const int pin_led_tx = 32 ;
# elif BOARD_MODEL == BOARD_LORA32_V1_0
# define HAS_DISPLAY true
# define HAS_BLUETOOTH true
# define HAS_BLE true
# define HAS_CONSOLE true
# define HAS_EEPROM true
const int pin_cs = 18 ;
const int pin_reset = 14 ;
const int pin_dio = 26 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 25 ;
const int pin_led_tx = 2 ;
# else
const int pin_led_rx = 2 ;
const int pin_led_tx = 2 ;
# endif
# elif BOARD_MODEL == BOARD_LORA32_V2_0
# define HAS_DISPLAY true
# define HAS_BLUETOOTH true
# define HAS_BLE true
# define HAS_CONSOLE true
# define HAS_EEPROM true
const int pin_cs = 18 ;
const int pin_reset = 12 ;
const int pin_dio = 26 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2 ;
const int pin_led_tx = 0 ;
# else
const int pin_led_rx = 22 ;
const int pin_led_tx = 22 ;
# endif
# elif BOARD_MODEL == BOARD_LORA32_V2_1
# define HAS_DISPLAY true
# define HAS_BLUETOOTH true
# define HAS_BLE true
# define HAS_PMU true
# define HAS_CONSOLE true
# define HAS_EEPROM true
const int pin_cs = 18 ;
const int pin_reset = 23 ;
const int pin_dio = 26 ;
# if HAS_TCXO == true
const int pin_tcxo_enable = 33 ;
# endif
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 15 ;
const int pin_led_tx = 4 ;
# else
const int pin_led_rx = 25 ;
const int pin_led_tx = 25 ;
# endif
# elif BOARD_MODEL == BOARD_HELTEC32_V2
# define HAS_DISPLAY true
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_EEPROM true
const int pin_cs = 18 ;
const int pin_reset = 23 ;
const int pin_dio = 26 ;
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 36 ;
const int pin_led_tx = 37 ;
# else
const int pin_led_rx = 25 ;
const int pin_led_tx = 25 ;
# endif
# elif BOARD_MODEL == BOARD_HELTEC_LORA32_V3
# define IS_ESP32S3 true
# define HAS_DISPLAY true
//ESP32-S3 no bluetooth classic
//#define HAS_BLUETOOTH true
# define HAS_BLUETOOTH false
//#define HAS_BLE true
// TODO BLE
# define HAS_BLE false
// Cannot run wifi and BLE at same time?
# define HAS_CONSOLE false
# define HAS_EEPROM true
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 35 ;
const int pin_led_tx = 2 ;
# else
const int pin_led_rx = 2 ;
const int pin_led_tx = 2 ;
# endif
# define MODEM SX1262
//#define HAS_TCXO true
# define HAS_TCXO false
# define HAS_BUSY true
# define DIO2_AS_RF_SWITCH true
const int pin_tcxo_enable = - 1 ;
// following pins are for the sx1262
const int pin_cs = 8 ;
const int pin_busy = 13 ;
const int pin_dio = 14 ;
const int pin_reset = 12 ;
const int pin_mosi = 10 ;
const int pin_miso = 11 ;
const int pin_sclk = 9 ;
# elif BOARD_MODEL == BOARD_RNODE_NG_20
# define HAS_DISPLAY true
# define HAS_BLUETOOTH true
# define HAS_NP true
# define HAS_CONSOLE true
# define HAS_EEPROM true
const int pin_cs = 18 ;
const int pin_reset = 12 ;
const int pin_dio = 26 ;
const int pin_np = 4 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2 ;
const int pin_led_tx = 0 ;
# else
const int pin_led_rx = 22 ;
const int pin_led_tx = 22 ;
# endif
# endif
# elif BOARD_MODEL == BOARD_RNODE_NG_21
# define HAS_DISPLAY true
# define HAS_BLUETOOTH true
# define HAS_CONSOLE true
# define HAS_PMU true
# define HAS_NP true
# define HAS_SD false
# define HAS_EEPROM true
const int pin_cs = 18 ;
const int pin_reset = 23 ;
const int pin_dio = 26 ;
const int pin_np = 12 ;
const int pin_dac = 25 ;
const int pin_adc = 34 ;
const int SD_MISO = 2 ;
const int SD_MOSI = 15 ;
const int SD_CLK = 14 ;
const int SD_CS = 13 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 12 ;
const int pin_led_tx = 4 ;
# else
const int pin_led_rx = 25 ;
const int pin_led_tx = 25 ;
# endif
# endif
# elif BOARD_MODEL == BOARD_RNODE_NG_22
# define IS_ESP32S3 true
# define MODEM SX1262
# define DIO2_AS_RF_SWITCH true
# define HAS_BUSY true
# define HAS_TCXO true
# define HAS_DISPLAY true
# define HAS_BLE true
# define HAS_BLUETOOTH false // TODO: Implement
# define HAS_CONSOLE false // TODO: Implement
# define HAS_PMU true
# define HAS_NP false
# define HAS_SD false
# define HAS_EEPROM true
const int pin_cs = 7 ;
const int pin_reset = 8 ;
const int pin_sclk = 5 ;
const int pin_mosi = 6 ;
const int pin_miso = 3 ;
const int pin_tcxo_enable = - 1 ;
const int pin_dio = 33 ;
const int pin_busy = 34 ;
const int pin_np = 38 ;
const int pin_dac = 25 ;
const int pin_adc = 1 ;
const int SD_MISO = 2 ;
const int SD_MOSI = 11 ;
const int SD_CLK = 14 ;
const int SD_CS = 13 ;
# if HAS_NP == false
# if defined(EXTERNAL_LEDS)
const int pin_led_rx = 37 ;
const int pin_led_tx = 37 ;
# else
const int pin_led_rx = 37 ;
const int pin_led_tx = 37 ;
# endif
# endif
# else
# error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
# endif
# elif MCU_VARIANT == MCU_NRF52
# if BOARD_MODEL == BOARD_RAK4630
# define HAS_EEPROM false
# define HAS_DISPLAY false // set for debugging
# define HAS_BLUETOOTH true
# define HAS_CONSOLE false
# define HAS_PMU false
# define HAS_NP false
# define HAS_SD false
# define HAS_TCXO true
# define HAS_RF_SWITCH_RX_TX true
# define HAS_BUSY true
# define CONFIG_UART_BUFFER_SIZE 6144
# define CONFIG_QUEUE_SIZE 6144
# define CONFIG_QUEUE_MAX_LENGTH 200
# define EEPROM_SIZE 200
# define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
// following pins are for the sx1262
const int pin_rxen = 37 ;
const int pin_reset = 38 ;
const int pin_cs = 42 ;
const int pin_sclk = 43 ;
const int pin_mosi = 44 ;
const int pin_miso = 45 ;
const int pin_busy = 46 ;
const int pin_dio = 47 ;
const int pin_led_rx = LED_BLUE ;
const int pin_led_tx = LED_GREEN ;
const int pin_tcxo_enable = - 1 ;
# else
# error An unsupported nRF board was selected. Cannot compile RNode firmware.
# endif
# endif
# ifndef HAS_RF_SWITCH_RX_TX
const int pin_rxen = - 1 ;
const int pin_txen = - 1 ;
# endif
# ifndef HAS_BUSY
const int pin_busy = - 1 ;
# endif
# ifndef DIO2_AS_RF_SWITCH
# define DIO2_AS_RF_SWITCH false
# endif
# endif
