# Copyright (C) 2024, Mark Qvist
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <https://www.gnu.org/licenses/>.
# Version 2.0.17 of the Arduino ESP core is based on ESP-IDF v4.4.7
ARDUINO_ESP_CORE_VER = 2.0.17
all : release
clean :
-rm -r ./build
-rm ./Release/rnode_firmware*
prep : prep -avr prep -esp 32 prep -samd
prep-avr :
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install arduino:avr --config-file arduino-cli.yaml
arduino-cli core install unsignedio:avr --config-file arduino-cli.yaml
prep-esp32 :
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install esp32:esp32@$( ARDUINO_ESP_CORE_VER) --config-file arduino-cli.yaml
arduino-cli lib install "Adafruit SSD1306"
arduino-cli lib install "Adafruit SH110X"
arduino-cli lib install "Adafruit ST7735 and ST7789 Library"
arduino-cli lib install "Adafruit NeoPixel"
arduino-cli lib install "XPowersLib"
arduino-cli lib install "Crypto"
prep-samd :
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install adafruit:samd --config-file arduino-cli.yaml
prep-nrf :
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
pip install adafruit-nrfutil --upgrade
console-site :
make -C Console clean site
spiffs : console -site spiffs -image
spiffs-image :
python Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin
upload-spiffs :
@echo Deploying SPIFFS image...
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
check_bt_buffers :
@./esp32_btbufs.py ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /libraries/BluetoothSerial/src/BluetoothSerial.cpp
firmware :
arduino-cli compile --log --fqbn unsignedio:avr:rnode
firmware-mega2560 :
arduino-cli compile --log --fqbn arduino:avr:mega
firmware-tbeam : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
firmware-tbeam_sx126x : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
firmware-t3s3 :
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x03\""
firmware-t3s3_sx127x :
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x01\""
firmware-tdeck :
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\""
firmware-tbeam_supreme :
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=-DBOARD_MODEL=0x3D"
firmware-lora32_v10 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
firmware-lora32_v10_extled : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
firmware-lora32_v20 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
firmware-lora32_v21 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
firmware-lora32_v21_extled : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
firmware-lora32_v21_tcxo : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
firmware-heltec32_v2 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
firmware-heltec32_v2_extled : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
firmware-heltec32_v3 :
arduino-cli compile --log --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
firmware-rnode_ng_20 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
firmware-rnode_ng_21 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
firmware-featheresp32 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
firmware-genericesp32 : check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
firmware-rak4631 :
arduino-cli compile --log --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\""
upload :
arduino-cli upload -p /dev/ttyUSB0 --fqbn unsignedio:avr:rnode
upload-mega2560 :
arduino-cli upload -p /dev/ttyACM0 --fqbn arduino:avr:mega
upload-tbeam :
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:t-beam
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-tbeam_sx1262 :
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:t-beam
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v10 :
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v20 :
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v21 :
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-heltec32_v2 :
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V2
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-heltec32_v3 :
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V3
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-tdeck :
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-tbeam_supreme :
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rnode_ng_20 :
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rnode_ng_21 :
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-t3s3 :
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-featheresp32 :
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$ ( ./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rak4631 :
arduino-cli upload -p /dev/ttyACM0 --fqbn rakwireless:nrf52:WisCoreRAK4631Board
release : release -all
release-all : console -site spiffs -image release -rnode release -tbeam release -tbeam_sx 1262 release -lora 32_v 10 release -lora 32_v 20 release -lora 32_v 21 release -lora 32_v 10_extled release -lora 32_v 20_extled release -lora 32_v 21_extled release -lora 32_v 21_tcxo release -featheresp 32 release -genericesp 32 release -heltec 32_v 2 release -heltec 32_v 3 release -heltec 32_v 2_extled release -rnode_ng_ 20 release -rnode_ng_ 21 release -t 3s 3 release -t 3s 3_sx 127x release -tdeck release -tbeam_supreme release -rak 4631 release -hashes
release-hashes :
python ./release_hashes.py > ./Release/release.json
release-rnode :
arduino-cli compile --fqbn unsignedio:avr:rnode -e
cp build/unsignedio.avr.rnode/RNode_Firmware.ino.hex Release/rnode_firmware.hex
rm -r build
release-tbeam : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_tbeam.boot_app0
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bin build/rnode_firmware_tbeam.bin
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam.bootloader
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam.partitions
zip --junk-paths ./Release/rnode_firmware_tbeam.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam.boot_app0 build/rnode_firmware_tbeam.bin build/rnode_firmware_tbeam.bootloader build/rnode_firmware_tbeam.partitions
rm -r build
release-tbeam_sx1262 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_sx1262.boot_app0
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bin build/rnode_firmware_tbeam_sx1262.bin
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam_sx1262.bootloader
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam_sx1262.partitions
zip --junk-paths ./Release/rnode_firmware_tbeam_sx1262.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_sx1262.boot_app0 build/rnode_firmware_tbeam_sx1262.bin build/rnode_firmware_tbeam_sx1262.bootloader build/rnode_firmware_tbeam_sx1262.partitions
rm -r build
release-lora32_v10 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v10.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v10.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
rm -r build
release-lora32_v20 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v20.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v20.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
rm -r build
release-lora32_v21 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v21.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
rm -r build
release-lora32_v10_extled : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v10.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v10.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
rm -r build
release-lora32_v20_extled : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v20.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v20.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v20_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
rm -r build
release-lora32_v21_extled : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v21.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v21_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
rm -r build
release-lora32_v21_tcxo : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21_tcxo.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21_tcxo.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21_tcxo.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v21_tcxo.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v21_tcxo.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21_tcxo.boot_app0 build/rnode_firmware_lora32v21_tcxo.bin build/rnode_firmware_lora32v21_tcxo.bootloader build/rnode_firmware_lora32v21_tcxo.partitions
rm -r build
release-heltec32_v2 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v2.bin
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
rm -r build
release-heltec32_v3 :
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v3.boot_app0
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v3.bin
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v3.bootloader
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v3.partitions
zip --junk-paths ./Release/rnode_firmware_heltec32v3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v3.boot_app0 build/rnode_firmware_heltec32v3.bin build/rnode_firmware_heltec32v3.bootloader build/rnode_firmware_heltec32v3.partitions
rm -r build
release-heltec32_v2_extled : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v2.bin
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
rm -r build
release-rnode_ng_20 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng20.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng20.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng20.partitions
zip --junk-paths ./Release/rnode_firmware_ng20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng20.boot_app0 build/rnode_firmware_ng20.bin build/rnode_firmware_ng20.bootloader build/rnode_firmware_ng20.partitions
rm -r build
release-rnode_ng_21 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng21.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng21.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng21.partitions
zip --junk-paths ./Release/rnode_firmware_ng21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng21.boot_app0 build/rnode_firmware_ng21.bin build/rnode_firmware_ng21.bootloader build/rnode_firmware_ng21.partitions
rm -r build
release-t3s3 :
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x03\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_t3s3.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3.partitions
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
rm -r build
release-t3s3_sx127x :
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x01\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_t3s3_sx127x.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3_sx127x.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3_sx127x.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3_sx127x.partitions
zip --junk-paths ./Release/rnode_firmware_t3s3_sx127x.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3_sx127x.boot_app0 build/rnode_firmware_t3s3_sx127x.bin build/rnode_firmware_t3s3_sx127x.bootloader build/rnode_firmware_t3s3_sx127x.partitions
rm -r build
release-tdeck :
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_tdeck.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tdeck.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tdeck.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tdeck.partitions
zip --junk-paths ./Release/rnode_firmware_tdeck.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tdeck.boot_app0 build/rnode_firmware_tdeck.bin build/rnode_firmware_tdeck.bootloader build/rnode_firmware_tdeck.partitions
rm -r build
release-tbeam_supreme :
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3D\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_supreme.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tbeam_supreme.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam_supreme.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam_supreme.partitions
zip --junk-paths ./Release/rnode_firmware_tbeam_supreme.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_supreme.boot_app0 build/rnode_firmware_tbeam_supreme.bin build/rnode_firmware_tbeam_supreme.bootloader build/rnode_firmware_tbeam_supreme.partitions
rm -r build
release-featheresp32 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.bin build/rnode_firmware_featheresp32.bin
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_featheresp32.bootloader
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_featheresp32.partitions
zip --junk-paths ./Release/rnode_firmware_featheresp32.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_featheresp32.boot_app0 build/rnode_firmware_featheresp32.bin build/rnode_firmware_featheresp32.bootloader build/rnode_firmware_featheresp32.partitions
rm -r build
release-genericesp32 : check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$( ARDUINO_ESP_CORE_VER) /tools/partitions/boot_app0.bin build/rnode_firmware_esp32_generic.boot_app0
cp build/esp32.esp32.esp32/RNode_Firmware.ino.bin build/rnode_firmware_esp32_generic.bin
cp build/esp32.esp32.esp32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_esp32_generic.bootloader
cp build/esp32.esp32.esp32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_esp32_generic.partitions
zip --junk-paths ./Release/rnode_firmware_esp32_generic.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_generic.boot_app0 build/rnode_firmware_esp32_generic.bin build/rnode_firmware_esp32_generic.bootloader build/rnode_firmware_esp32_generic.partitions
rm -r build
release-mega2560 :
arduino-cli compile --fqbn arduino:avr:mega -e --build-property "compiler.cpp.extra_flags=\"-DMODEM=0x01\""
cp build/arduino.avr.mega/RNode_Firmware.ino.hex Release/rnode_firmware_m2560.hex
rm -r build
release-rak4631 :
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\""
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware.ino.hex build/rnode_firmware_rak4631.hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631.hex Release/rnode_firmware_rak4631.zip
