marcel
/
RNode_Firmware_CE
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add T3S3 target and different variants of the board

Browse Source
master
jacob.eva 8 months ago
parent 236ea0b999
commit 35e9f36ffd
No known key found for this signature in database
GPG Key ID: B92E083BBCCAA1E
6 changed files with 35 additions and 15 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 25
      Boards.h
  2. 4
      Display.h
  3. 7
      Makefile
  4. 4
      RNode_Firmware_CE.ino
  5. 2
      Radio.cpp
  6. 8
      Utilities.h

25
Boards.h
Unescape View File

@ -24,6 +24,7 @@
#define MCU_ESP32 0x81 #define MCU_ESP32 0x81
#define MCU_NRF52 0x71 #define MCU_NRF52 0x71
// Boards
#define BOARD_RNODE 0x31 #define BOARD_RNODE 0x31
#define BOARD_HMBRW 0x32 #define BOARD_HMBRW 0x32
#define BOARD_TBEAM 0x33 #define BOARD_TBEAM 0x33
@ -36,10 +37,16 @@
#define BOARD_HELTEC32_V3 0x3A #define BOARD_HELTEC32_V3 0x3A
#define BOARD_RNODE_NG_20 0x40 #define BOARD_RNODE_NG_20 0x40
#define BOARD_RNODE_NG_21 0x41 #define BOARD_RNODE_NG_21 0x41
#define BOARD_RNODE_NG_22 0x42 #define BOARD_T3S3 0x42
#define BOARD_GENERIC_NRF52 0x50 #define BOARD_GENERIC_NRF52 0x50
#define BOARD_RAK4631 0x51 #define BOARD_RAK4631 0x51
// Variants
#define BOARD_T3S3_SX1262 0x01
#define BOARD_T3S3_SX1280 0x02
#define BOARD_T3S3_SX1280_PA 0x03
// Displays
#define OLED 0x01 #define OLED 0x01
#define EINK_BW 0x02 #define EINK_BW 0x02
#define EINK_3C 0x03 #define EINK_3C 0x03
@ -545,7 +552,7 @@
} }
}; };
#elif BOARD_MODEL == BOARD_RNODE_NG_22 #elif BOARD_MODEL == BOARD_T3S3
#define IS_ESP32S3 true #define IS_ESP32S3 true
#define HAS_DISPLAY true #define HAS_DISPLAY true
@ -585,7 +592,7 @@
#endif #endif
#endif #endif
#if BOARD_VARIANT == BOARD_T3S3_SX1262
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262}; const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = { const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262 // SX1262
@ -595,6 +602,17 @@
true // DIO2_AS_RF_SWITCH true // DIO2_AS_RF_SWITCH
}, },
}; };
#elif BOARD_VARIANT == BOARD_T3S3_SX1280_PA
const uint8_t interfaces[INTERFACE_COUNT] = {SX1280};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
#endif
const uint8_t interface_pins[INTERFACE_COUNT][10] = { const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262 // SX1262
{ {
@ -610,7 +628,6 @@
-1 // pin_tcxo_enable -1 // pin_tcxo_enable
} }
}; };
#else #else
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware. #error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
#endif #endif

4
Display.h
Unescape View File

@ -68,7 +68,7 @@ void busyCallback(const void* p) {
#define DISP_RST -1 #define DISP_RST -1
#define DISP_ADDR 0x3C #define DISP_ADDR 0x3C
#endif #endif
#elif BOARD_MODEL == BOARD_RNODE_NG_22 #elif BOARD_MODEL == BOARD_T3S3
#if DISPLAY == OLED #if DISPLAY == OLED
#define DISP_RST 21 #define DISP_RST 21
#define DISP_ADDR 0x3C #define DISP_ADDR 0x3C
@ -200,7 +200,7 @@ bool display_init() {
digitalWrite(pin_display_en, LOW); digitalWrite(pin_display_en, LOW);
delay(50); delay(50);
digitalWrite(pin_display_en, HIGH); digitalWrite(pin_display_en, HIGH);
#elif BOARD_MODEL == BOARD_RNODE_NG_22 #elif BOARD_MODEL == BOARD_T3S3
Wire.begin(SDA_OLED, SCL_OLED); Wire.begin(SDA_OLED, SCL_OLED);
#elif BOARD_MODEL == BOARD_HELTEC32_V2 #elif BOARD_MODEL == BOARD_HELTEC32_V2
Wire.begin(SDA_OLED, SCL_OLED); Wire.begin(SDA_OLED, SCL_OLED);

7
Makefile
Unescape View File

@ -71,8 +71,11 @@ firmware-tbeam:
firmware-tbeam_sx126x: firmware-tbeam_sx126x:
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\"" arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
firmware-t3s3: firmware-t3s3_sx1262:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\"" arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0x01\""
firmware-t3s3_sx1280_pa:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0x03\""
firmware-lora32_v10: firmware-lora32_v10:
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""

4
RNode_Firmware_CE.ino
Unescape View File

@ -87,7 +87,7 @@ void setup() {
Serial.begin(serial_baudrate); Serial.begin(serial_baudrate);
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_RNODE_NG_22 #if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_T3S3
// Some boards need to wait until the hardware UART is set up before booting // Some boards need to wait until the hardware UART is set up before booting
// the full firmware. In the case of the RAK4631, the line below will wait // the full firmware. In the case of the RAK4631, the line below will wait
// until a serial connection is actually established with a master. Thus, it // until a serial connection is actually established with a master. Thus, it
@ -1283,7 +1283,7 @@ void process_serial() {
void sleep_now() { void sleep_now() {
#if HAS_SLEEP == true #if HAS_SLEEP == true
#if BOARD_MODEL == BOARD_RNODE_NG_22 #if BOARD_MODEL == BOARD_T3S3
display_intensity = 0; display_intensity = 0;
update_display(true); update_display(true);
#endif #endif

2
Radio.cpp
Unescape View File

@ -735,7 +735,7 @@ void sx126x::enableTCXO() {
uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF}; uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF};
#elif BOARD_MODEL == BOARD_TBEAM #elif BOARD_MODEL == BOARD_TBEAM
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF}; uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
#elif BOARD_MODEL == BOARD_RNODE_NG_22 #elif BOARD_MODEL == BOARD_T3S3
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF}; uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
#else #else
uint8_t buf[4] = {0}; uint8_t buf[4] = {0};

8
Utilities.h
Unescape View File

@ -65,9 +65,9 @@ uint8_t eeprom_read(uint32_t mapped_addr);
#if BOARD_MODEL == BOARD_HELTEC32_V3 #if BOARD_MODEL == BOARD_HELTEC32_V3
//https://github.com/espressif/esp-idf/issues/8855 //https://github.com/espressif/esp-idf/issues/8855
#include "hal/wdt_hal.h" #include "hal/wdt_hal.h"
#elif BOARD_MODEL == BOARD_RNODE_NG_22 #elif BOARD_MODEL == BOARD_T3S3
#include "hal/wdt_hal.h" #include "hal/wdt_hal.h"
#else BOARD_MODEL != BOARD_RNODE_NG_22 #else BOARD_MODEL != BOARD_T3S3
#include "soc/rtc_wdt.h" #include "soc/rtc_wdt.h"
#endif #endif
#define ISR_VECT IRAM_ATTR #define ISR_VECT IRAM_ATTR
@ -137,7 +137,7 @@ uint8_t boot_vector = 0x00;
void led_rx_off() { digitalWrite(pin_led_rx, LOW); } void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
void led_tx_off() { digitalWrite(pin_led_tx, LOW); } void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
#elif BOARD_MODEL == BOARD_RNODE_NG_22 #elif BOARD_MODEL == BOARD_T3S3
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); } void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
void led_rx_off() { digitalWrite(pin_led_rx, LOW); } void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); } void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
@ -1332,7 +1332,7 @@ bool eeprom_model_valid() {
if (model == MODEL_A3 || model == MODEL_A8) { if (model == MODEL_A3 || model == MODEL_A8) {
#elif BOARD_MODEL == BOARD_RNODE_NG_21 #elif BOARD_MODEL == BOARD_RNODE_NG_21
if (model == MODEL_A2 || model == MODEL_A7) { if (model == MODEL_A2 || model == MODEL_A7) {
#elif BOARD_MODEL == BOARD_RNODE_NG_22 #elif BOARD_MODEL == BOARD_T3S3
if (model == MODEL_A1 || model == MODEL_A6) { if (model == MODEL_A1 || model == MODEL_A6) {
#elif BOARD_MODEL == BOARD_HMBRW #elif BOARD_MODEL == BOARD_HMBRW
if (model == MODEL_FF || model == MODEL_FE) { if (model == MODEL_FF || model == MODEL_FE) {

Write Preview
Loading…
Cancel
Save