marcel
/
RNode_Firmware_CE
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Clean up debug prints for PR

Browse Source
master
Kevin Brosius 12 months ago
parent 36ab438625
commit 5c1e0f25ee
5 changed files with 13 additions and 78 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 6
      Boards.h
  2. 27
      Display.h
  3. 2
      Makefile
  4. 48
      RNode_Firmware.ino
  5. 8
      Utilities.h

6
Boards.h
Unescape View File

@ -261,14 +261,13 @@
#define IS_ESP32S3 true #define IS_ESP32S3 true
#define HAS_DISPLAY true #define HAS_DISPLAY true
//ESP32-S3 no bluetooth classic //ESP32-S3 no bluetooth classic
//#define HAS_BLUETOOTH true
#define HAS_BLUETOOTH false #define HAS_BLUETOOTH false
//#define HAS_BLE true
// TODO BLE // TODO BLE
#define HAS_BLE false #define HAS_BLE false
// Cannot run wifi and BLE at same time? // Cannot run wifi and BLE at same time?
#define HAS_CONSOLE false #define HAS_CONSOLE false
#define HAS_EEPROM true #define HAS_EEPROM true
// Only one LED on pin 35
#if defined(EXTERNAL_LEDS) #if defined(EXTERNAL_LEDS)
const int pin_led_rx = 35; const int pin_led_rx = 35;
const int pin_led_tx = 2; const int pin_led_tx = 2;
@ -278,11 +277,12 @@
#endif #endif
#define MODEM SX1262 #define MODEM SX1262
// TODO TCXO?
//#define HAS_TCXO true //#define HAS_TCXO true
#define HAS_TCXO false #define HAS_TCXO false
const int pin_tcxo_enable = -1;
#define HAS_BUSY true #define HAS_BUSY true
#define DIO2_AS_RF_SWITCH true #define DIO2_AS_RF_SWITCH true
const int pin_tcxo_enable = -1;
// following pins are for the sx1262 // following pins are for the sx1262
const int pin_cs = 8; const int pin_cs = 8;

27
Display.h
Unescape View File

@ -34,7 +34,6 @@
#define SDA_OLED 4 #define SDA_OLED 4
#elif BOARD_MODEL == BOARD_HELTEC_LORA32_V3 #elif BOARD_MODEL == BOARD_HELTEC_LORA32_V3
#define DISP_RST 21 #define DISP_RST 21
//#define DISP_RST -1
#define DISP_ADDR 0x3C #define DISP_ADDR 0x3C
#define SCL_OLED 18 #define SCL_OLED 18
#define SDA_OLED 17 #define SDA_OLED 17
@ -115,28 +114,17 @@ bool display_init() {
#elif BOARD_MODEL == BOARD_HELTEC32_V2 #elif BOARD_MODEL == BOARD_HELTEC32_V2
Wire.begin(SDA_OLED, SCL_OLED); Wire.begin(SDA_OLED, SCL_OLED);
#elif BOARD_MODEL == BOARD_HELTEC_LORA32_V3 #elif BOARD_MODEL == BOARD_HELTEC_LORA32_V3
Serial.println("display - 1 "); // enable vext / pin 36
// vext
pinMode(Vext, OUTPUT); pinMode(Vext, OUTPUT);
//digitalWrite(36, LOW);
digitalWrite(Vext, LOW); digitalWrite(Vext, LOW);
delay(500); delay(50);
Serial.println("display - 2 ");
//Serial.print("vext ");
//Serial.println(Vext);
int pin_display_en = 21; int pin_display_en = 21;
//digitalWrite(pin_display_en, HIGH);
//delay(50);
pinMode(pin_display_en, OUTPUT); pinMode(pin_display_en, OUTPUT);
digitalWrite(pin_display_en, LOW); digitalWrite(pin_display_en, LOW);
delay(50); delay(50);
digitalWrite(pin_display_en, HIGH); digitalWrite(pin_display_en, HIGH);
delay(50); delay(50);
Wire.begin(SDA_OLED, SCL_OLED); Wire.begin(SDA_OLED, SCL_OLED);
// ble debug
//Serial.println("Setup display pins LORA32 V3");
Serial.println("vext ");
Serial.println(Vext);
#elif BOARD_MODEL == BOARD_LORA32_V1_0 #elif BOARD_MODEL == BOARD_LORA32_V1_0
int pin_display_en = 16; int pin_display_en = 16;
digitalWrite(pin_display_en, LOW); digitalWrite(pin_display_en, LOW);
@ -180,7 +168,9 @@ bool display_init() {
display.setRotation(1); display.setRotation(1);
#elif BOARD_MODEL == BOARD_HELTEC_LORA32_V3 #elif BOARD_MODEL == BOARD_HELTEC_LORA32_V3
disp_mode = DISP_MODE_PORTRAIT; disp_mode = DISP_MODE_PORTRAIT;
// Antenna conx up
display.setRotation(1); display.setRotation(1);
// USB-C up
//display.setRotation(3); //display.setRotation(3);
#else #else
disp_mode = DISP_MODE_PORTRAIT; disp_mode = DISP_MODE_PORTRAIT;
@ -198,14 +188,7 @@ bool display_init() {
disp_area.cp437(true); disp_area.cp437(true);
display.cp437(true); display.cp437(true);
Serial.print("(1)display int= ");
Serial.println(display_intensity);
display_intensity = EEPROM.read(eeprom_addr(ADDR_CONF_DINT)); display_intensity = EEPROM.read(eeprom_addr(ADDR_CONF_DINT));
Serial.print("(2)display int= ");
Serial.println(display_intensity);
display_intensity = 100;
Serial.print("(2)display int= ");
Serial.println(display_intensity);
return true; return true;
} }
@ -566,8 +549,6 @@ void draw_disp_area() {
} }
void update_disp_area() { void update_disp_area() {
// ble debug
Serial.println("...update disp area...");
draw_disp_area(); draw_disp_area();
display.drawBitmap(p_ad_x, p_ad_y, disp_area.getBuffer(), disp_area.width(), disp_area.height(), SSD1306_WHITE, SSD1306_BLACK); display.drawBitmap(p_ad_x, p_ad_y, disp_area.getBuffer(), disp_area.width(), disp_area.height(), SSD1306_WHITE, SSD1306_BLACK);
if (disp_mode == DISP_MODE_LANDSCAPE) { if (disp_mode == DISP_MODE_LANDSCAPE) {

2
Makefile
Unescape View File

@ -94,7 +94,7 @@ firmware-heltec32_v2_extled:
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\"" arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
firmware-heltec32_v3: firmware-heltec32_v3:
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\"" arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3a\""
firmware-rnode_ng_20: firmware-rnode_ng_20:
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\"" arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""

48
RNode_Firmware.ino
Unescape View File

@ -143,9 +143,6 @@ void setup() {
eeprom_update(eeprom_addr(ADDR_CONF_DINT), 0xFF); eeprom_update(eeprom_addr(ADDR_CONF_DINT), 0xFF);
} }
disp_ready = display_init(); disp_ready = display_init();
// ble debug
Serial.print("disp ready = ");
Serial.println(disp_ready);
update_display(); update_display();
#endif #endif
@ -383,10 +380,6 @@ void stopRadio() {
} }
void update_radio_lock() { void update_radio_lock() {
// ble debug
//static char lock[40];
//sprintf(lock, "lock chk %d %d %x %d", lora_freq, lora_bw, lora_txp, lora_sf);
//Serial.println(lock);
if (lora_freq != 0 && lora_bw != 0 && lora_txp != 0xFF && lora_sf != 0) { if (lora_freq != 0 && lora_bw != 0 && lora_txp != 0xFF && lora_sf != 0) {
radio_locked = false; radio_locked = false;
} else { } else {
@ -612,9 +605,6 @@ void serialCallback(uint8_t sbyte) {
lora_freq = freq; lora_freq = freq;
if (op_mode == MODE_HOST) setFrequency(); if (op_mode == MODE_HOST) setFrequency();
kiss_indicate_frequency(); kiss_indicate_frequency();
// ble debug
//Serial.print("freq ");
//Serial.println(lora_freq);
} }
} }
} else if (command == CMD_BANDWIDTH) { } else if (command == CMD_BANDWIDTH) {
@ -700,8 +690,6 @@ void serialCallback(uint8_t sbyte) {
} else if (sbyte == 0x01) { } else if (sbyte == 0x01) {
startRadio(); startRadio();
kiss_indicate_radiostate(); kiss_indicate_radiostate();
// ble debug
//Serial.println("start radio");
} }
} else if (command == CMD_ST_ALOCK) { } else if (command == CMD_ST_ALOCK) {
if (sbyte == FESC) { if (sbyte == FESC) {
@ -1075,11 +1063,6 @@ void validate_status() {
uint8_t F_WDR = 0x01; uint8_t F_WDR = 0x01;
#endif #endif
// ble debug
Serial.print("hw_ready ");
Serial.print(hw_ready);
Serial.print(" device init done ");
Serial.println(device_init_done);
if (hw_ready || device_init_done) { if (hw_ready || device_init_done) {
hw_ready = false; hw_ready = false;
Serial.write("Error, invalid hardware check state\r\n"); Serial.write("Error, invalid hardware check state\r\n");
@ -1110,32 +1093,22 @@ void validate_status() {
} }
if (boot_vector == START_FROM_BOOTLOADER || boot_vector == START_FROM_POWERON) { if (boot_vector == START_FROM_BOOTLOADER || boot_vector == START_FROM_POWERON) {
//if (eeprom_lock_set()) { if (eeprom_lock_set()) {
if (1) {
if (eeprom_product_valid() && eeprom_model_valid() && eeprom_hwrev_valid()) { if (eeprom_product_valid() && eeprom_model_valid() && eeprom_hwrev_valid()) {
if (eeprom_checksum_valid()) { if (eeprom_checksum_valid()) {
eeprom_ok = true; eeprom_ok = true;
if (modem_installed) { if (modem_installed) {
#if PLATFORM == PLATFORM_ESP32 #if PLATFORM == PLATFORM_ESP32
if (device_init()) { if (device_init()) {
// ble debug
Serial.println("hw ready 1");
hw_ready = true; hw_ready = true;
} else { } else {
hw_ready = false; hw_ready = false;
// ble debug
Serial.println("hw ! ready 1");
} }
#else #else
hw_ready = true; hw_ready = true;
// ble debug
Serial.println("hw ready 2");
#endif #endif
} else { } else {
hw_ready = false; hw_ready = false;
// ble debug
Serial.println("hw ! ready 3");
Serial.write("No valid radio module found\r\n");
#if HAS_DISPLAY #if HAS_DISPLAY
if (disp_ready) { if (disp_ready) {
device_init_done = true; device_init_done = true;
@ -1148,14 +1121,9 @@ void validate_status() {
eeprom_conf_load(); eeprom_conf_load();
op_mode = MODE_TNC; op_mode = MODE_TNC;
startRadio(); startRadio();
// ble debug
Serial.println("hw ready - start radio");
} }
} else { } else {
hw_ready = false; hw_ready = false;
// ble debug
Serial.println("hw ! ready 4");
#if HAS_DISPLAY #if HAS_DISPLAY
if (disp_ready) { if (disp_ready) {
device_init_done = true; device_init_done = true;
@ -1165,26 +1133,15 @@ void validate_status() {
} }
} else { } else {
hw_ready = false; hw_ready = false;
// ble debug
Serial.println("hw ! ready 5 - override - TODO");
// override eeprom flags - ble debug
hw_ready = true;
//
#if HAS_DISPLAY #if HAS_DISPLAY
if (disp_ready) { if (disp_ready) {
device_init_done = true; device_init_done = true;
update_display(); update_display();
// ble debug
Serial.println("update display called");
} }
#endif #endif
} }
} else { } else {
hw_ready = false; hw_ready = false;
// ble debug
Serial.println("hw ! ready 6");
#if HAS_DISPLAY #if HAS_DISPLAY
if (disp_ready) { if (disp_ready) {
device_init_done = true; device_init_done = true;
@ -1194,9 +1151,6 @@ void validate_status() {
} }
} else { } else {
hw_ready = false; hw_ready = false;
// ble debug
Serial.println("hw ! ready 7 - bad boot vector");
Serial.write("Error, incorrect boot vector\r\n");
#if HAS_DISPLAY #if HAS_DISPLAY
if (disp_ready) { if (disp_ready) {
device_init_done = true; device_init_done = true;

8
Utilities.h
Unescape View File

@ -60,12 +60,12 @@ sx128x *LoRa = &sx128x_modem;
#include "Device.h" #include "Device.h"
#endif #endif
#if MCU_VARIANT == MCU_ESP32 #if MCU_VARIANT == MCU_ESP32
//#if BOARD_MODEL != BOARD_RNODE_NG_22 && BOARD_MODEL != BOARD_HELTEC_LORA32_V3 #if BOARD_MODEL == BOARD_HELTEC_LORA32_V3
// #include "soc/rtc_wdt.h"
//#else
//https://github.com/espressif/esp-idf/issues/8855 //https://github.com/espressif/esp-idf/issues/8855
#include "hal/wdt_hal.h" #include "hal/wdt_hal.h"
//#endif #elif BOARD_MODEL != BOARD_RNODE_NG_22
#include "soc/rtc_wdt.h"
#endif
#define ISR_VECT IRAM_ATTR #define ISR_VECT IRAM_ATTR
#else #else
#define ISR_VECT #define ISR_VECT

Write Preview
Loading…
Cancel
Save