Add support for LoRa32 v2.0

Config.h

@@ -103,11 +103,11 @@
 			const int pin_reset = 12;
 			const int pin_dio = 26;
 			#if defined(EXTERNAL_LEDS)
-				const int pin_led_rx = 15;
-				const int pin_led_tx = 4;
+				const int pin_led_rx = 2;
+				const int pin_led_tx = 0;
 			#else
-				const int pin_led_rx = 23;
-				const int pin_led_tx = 23;
+				const int pin_led_rx = 22;
+				const int pin_led_tx = 22;
 			#endif
 		#elif BOARD_MODEL == BOARD_LORA32_V2_1
 			const int pin_cs = 18;

Makefile

@@ -48,7 +48,7 @@ upload-tbeam:
 	arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:t-beam
 
 upload-lora32_v20:
-	arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32
+	arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
 
 upload-lora32_v21:
 	arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32

Utilities.h

@@ -42,10 +42,17 @@ uint8_t boot_vector = 0x00;
 		void led_tx_on()  { digitalWrite(pin_led_tx, LOW); }
 		void led_tx_off() { digitalWrite(pin_led_tx, HIGH); }
 	#elif BOARD_MODEL == BOARD_LORA32_V2_0
-		void led_rx_on()  { digitalWrite(pin_led_rx, HIGH); }
-		void led_rx_off() {	digitalWrite(pin_led_rx, LOW); }
-		void led_tx_on()  { digitalWrite(pin_led_tx, HIGH); }
-		void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
+		#if defined(EXTERNAL_LEDS)
+			void led_rx_on()  { digitalWrite(pin_led_rx, HIGH); }
+			void led_rx_off() {	digitalWrite(pin_led_rx, LOW); }
+			void led_tx_on()  { digitalWrite(pin_led_tx, HIGH); }
+			void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
+		#else
+			void led_rx_on()  { digitalWrite(pin_led_rx, LOW); }
+			void led_rx_off() {	digitalWrite(pin_led_rx, HIGH); }
+			void led_tx_on()  { digitalWrite(pin_led_tx, LOW); }
+			void led_tx_off() { digitalWrite(pin_led_tx, HIGH); }
+		#endif
 	#elif BOARD_MODEL == BOARD_LORA32_V2_1
 		void led_rx_on()  { digitalWrite(pin_led_rx, HIGH); }
 		void led_rx_off() {	digitalWrite(pin_led_rx, LOW); }
@@ -143,6 +150,19 @@ void led_indicate_warning(int cycles) {
 		  }
 		  led_rx_off();
 		}
+	#elif BOARD_MODEL == BOARD_LORA32_V2_0
+		void led_indicate_info(int cycles) {
+			bool forever = (cycles == 0) ? true : false;
+			cycles = forever ? 1 : cycles;
+			while(cycles > 0) {
+		    led_rx_off();
+		    delay(100);
+		    led_rx_on();
+		    delay(100);
+		    if (!forever) cycles--;
+		  }
+		  led_rx_off();
+		}
 	#else
 		void led_indicate_info(int cycles) {
 			bool forever = (cycles == 0) ? true : false;
@@ -214,10 +234,13 @@ int8_t  led_standby_direction = 0;
 				#if defined(EXTERNAL_LEDS)
 					led_rx_off();
 				#endif
+			#elif BOARD_MODEL == BOARD_LORA32_V2_0
+				#if defined(EXTERNAL_LEDS)
+					led_rx_off();
+				#endif
 			#else
 				led_rx_off();
 			#endif
-
 		}
 	}
 #endif
@@ -253,7 +276,17 @@ int8_t  led_standby_direction = 0;
 			} else {
 				led_tx_off();
 			}
-			led_rx_off();
+			#if BOARD_MODEL == BOARD_LORA32_V2_1
+				#if defined(EXTERNAL_LEDS)
+					led_rx_off();
+				#endif
+			#elif BOARD_MODEL == BOARD_LORA32_V2_0
+				#if defined(EXTERNAL_LEDS)
+					led_rx_off();
+				#endif
+			#else
+				led_rx_off();
+			#endif
 		}
 	}
 #endif