This is a copy of the community maintained fork of the open firmware which powers RNode devices. This version will have support for the hardware made by Mees Electronics.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

58 lines
1.7 KiB

// Copyright (C) 2024, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#ifndef ROM_H
#define ROM_H
#define CHECKSUMMED_SIZE 0x0B
// ROM address map ///////////////
#define ADDR_PRODUCT 0x00
#define ADDR_MODEL 0x01
#define ADDR_HW_REV 0x02
#define ADDR_SERIAL 0x03
#define ADDR_MADE 0x07
#define ADDR_CHKSUM 0x0B
#define ADDR_SIGNATURE 0x1B
#define ADDR_INFO_LOCK 0x9B
#define ADDR_CONF_SF 0x9C
#define ADDR_CONF_CR 0x9D
#define ADDR_CONF_TXP 0x9E
#define ADDR_CONF_BW 0x9F
#define ADDR_CONF_FREQ 0xA3
#define ADDR_CONF_OK 0xA7
#define ADDR_CONF_BT 0xB0
#define ADDR_CONF_DSET 0xB1
#define ADDR_CONF_DINT 0xB2
#define ADDR_CONF_DADR 0xB3
#define ADDR_CONF_DBLK 0xB4
#define ADDR_CONF_PSET 0xB5
#define ADDR_CONF_PINT 0xB6
#define ADDR_CONF_BSET 0xB7
#define ADDR_CONF_DROT 0xB8
#define ADDR_CONF_PSET 0xB5
#define ADDR_CONF_PINT 0xB6
#define ADDR_CONF_BSET 0xB7
#define ADDR_CONF_DIA 0xB9
#define INFO_LOCK_BYTE 0x73
#define CONF_OK_BYTE 0x73
#define BT_ENABLE_BYTE 0x73
#define EEPROM_RESERVED 200
//////////////////////////////////
#endif