marcel
/
RNode_Firmware_CE
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
This is a copy of the community maintained fork of the open firmware which powers RNode devices. This version will have support for the hardware made by Mees Electronics.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
709 Commits
1 Branch
0 Tags
116 MiB
 
 
 
 
 
Tag: Branch: Tree: d2c0d53bdd
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'd2c0d53bdd'
${ noResults }
RNode_Firmware_CE/Boards.h

1090 lines
32 KiB
Raw Blame History

// Copyright (C) 2024, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#include "Interfaces.h"
#include "ROM.h"
#ifndef BOARDS_H
#define BOARDS_H
#define PLATFORM_ESP32 0x80
#define PLATFORM_NRF52 0x70
#define MCU_ESP32 0x81
#define MCU_NRF52 0x71
// Products, boards and models. Grouped by manufacturer.
// Below are the original RNodes, sold by Mark Qvist.
#define PRODUCT_RNODE 0x03 // RNode devices
#define BOARD_RNODE 0x31 // Original v1.0 RNode
#define MODEL_A4 0xA4 // RNode v1.0, 433 MHz
#define MODEL_A9 0xA9 // RNode v1.0, 868 MHz
#define BOARD_RNODE_NG_20 0x40 // RNode hardware revision v2.0
#define MODEL_A3 0xA3 // RNode v2.0, 433 MHz
#define MODEL_A8 0xA8 // RNode v2.0, 868 MHz
#define BOARD_RNODE_NG_21 0x41 // RNode hardware revision v2.1
#define MODEL_A2 0xA2 // RNode v2.1, 433 MHz
#define MODEL_A7 0xA7 // RNode v2.1, 868 MHz
#define BOARD_RNODE_NG_22 0x42 // RNode hardware revision v2.2 (T3S3)
#define MODEL_A1 0xA1 // RNode v2.2, 433 MHz with SX1268
#define MODEL_A5 0xA5 // RNode v2.2, 433 MHz with SX1278
#define MODEL_A6 0xA6 // RNode v2.2, 868 MHz with SX1262
#define MODEL_AA 0xAA // RNode v2.2, 868 MHz with SX1276
#define PRODUCT_TBEAM 0xE0 // T-Beam - sold by LilyGO
#define BOARD_TBEAM 0x33
#define MODEL_E4 0xE4 // T-Beam SX1278, 433 Mhz
#define MODEL_E9 0xE9 // T-Beam SX1276, 868 Mhz
#define MODEL_E3 0xE3 // T-Beam SX1268, 433 Mhz
#define MODEL_E8 0xE8 // T-Beam SX1262, 868 Mhz
#define PRODUCT_TDECK_V1 0xD0 // T-Deck - sold by LilyGO
#define BOARD_TDECK 0x3B
#define MODEL_D4 0xD4 // LilyGO T-Deck, 433 MHz
#define MODEL_D9 0xD9 // LilyGO T-Deck, 868 MHz
#define PRODUCT_TBEAM_S_V1 0xEA // T-Beam Supreme - sold by LilyGO
#define BOARD_TBEAM_S_V1 0x3D
#define MODEL_DB 0xDB // LilyGO T-Beam Supreme, 433 MHz
#define MODEL_DC 0xDC // LilyGO T-Beam Supreme, 868 MHz
#define PRODUCT_T32_10 0xB2 // T3 v1.0 - sold by LilyGO
#define BOARD_LORA32_V1_0 0x39
#define MODEL_BA 0xBA // LilyGO T3 v1.0, 433 MHz
#define MODEL_BB 0xBB // LilyGO T3 v1.0, 868 MHz
#define PRODUCT_T32_20 0xB0 // T3 v2.0 - sold by LilyGO
#define BOARD_LORA32_V2_0 0x36
#define MODEL_B3 0xB3 // LilyGO T3 v2.0, 433 MHz
#define MODEL_B8 0xB8 // LilyGO T3 v2.0, 868 MHz
#define PRODUCT_T32_21 0xB1 // T3 v2.1 - sold by LilyGO
#define BOARD_LORA32_V2_1 0x37
#define MODEL_B4 0xB4 // LilyGO T3 v2.1, 433 MHz
#define MODEL_B9 0xB9 // LilyGO T3 v2.1, 868 MHz
#define BOARD_T3S3 0x43 // T3S3 - sold by LilyGO
#define MODEL_A1 0xA1 // T3S3 SX1262 868/915 MHz
#define MODEL_AB 0xAB // T3S3 SX1276 868/915 MHz
#define MODEL_A5 0xA5 // T3S3 SX1278 433 MHz
#define MODEL_AC 0xAC // T3S3 SX1280 2.4 GHz w/ PA
#define PRODUCT_TECHO 0x15 // LilyGO T-Echo devices
#define BOARD_TECHO 0x44
#define MODEL_16 0x16 // T-Echo 433 MHz
#define MODEL_17 0x17 // T-Echo 868/915 MHz
#define PRODUCT_H32_V2 0xC0 // LoRa32 v2 - sold by Heltec
#define BOARD_HELTEC32_V2 0x38
#define MODEL_C4 0xC4 // Heltec Lora32 v2, 433 MHz
#define MODEL_C9 0xC9 // Heltec Lora32 v2, 868 MHz
#define PRODUCT_H32_V3 0xC1 // LoRa32 v3 - sold by Heltec
#define BOARD_HELTEC32_V3 0x3A
#define MODEL_C5 0xC5 // Heltec Lora32 v3, 433 MHz
#define MODEL_CA 0xCA // Heltec Lora32 v3, 868 MHz
#define PRODUCT_RAK4631 0x10 // RAK4631 - sold by RAKWireless
#define BOARD_RAK4631 0x51
#define MODEL_11 0x11 // RAK4631, 433 MHz
#define MODEL_12 0x12 // RAK4631, 868 MHz
#define MODEL_13 0x13 // RAK4631, 433MHz with WisBlock SX1280 module (LIBSYS002)
#define MODEL_14 0x14 // RAK4631, 868/915 MHz with WisBlock SX1280 module (LIBSYS002)
#define PRODUCT_OPENCOM_XL 0x20 // openCom XL - sold by Liberated Embedded Systems
#define BOARD_OPENCOM_XL 0x52
#define MODEL_21 0x21 // openCom XL, 868/915 MHz
#define BOARD_E22_ESP32 0x45 // Custom Ebyte E22 board design for meshtastic, source:
// https://github.com/NanoVHF/Meshtastic-DIY/blob/main/Schematics/E-Byte_E22/Mesh_Ebyte_E22-XXXM30S.pdf
#define PRODUCT_HMBRW 0xF0
#define BOARD_HMBRW 0x32
#define BOARD_HUZZAH32 0x34
#define BOARD_GENERIC_ESP32 0x35
#define BOARD_GENERIC_NRF52 0x50
#define MODEL_FE 0xFE // Homebrew board, max 17dBm output power
#define MODEL_FF 0xFF // Homebrew board, max 14dBm output power
// Displays
#define OLED 0x01
#define EINK_BW 0x02
#define EINK_3C 0x03
#if defined(ESP32)
#define PLATFORM PLATFORM_ESP32
#define MCU_VARIANT MCU_ESP32
#elif defined(NRF52840_XXAA) || defined(_VARIANT_PCA10056_)
#include <variant.h>
#define PLATFORM PLATFORM_NRF52
#define MCU_VARIANT MCU_NRF52
#else
#error "The firmware cannot be compiled for the selected MCU variant"
#endif
#define HAS_DISPLAY false
#define HAS_BLUETOOTH false
#define HAS_BLE false
#define HAS_TCXO false
#define HAS_PMU false
#define HAS_NP false
#define HAS_EEPROM false
#define HAS_INPUT false
#define HAS_SLEEP false
#define PIN_DISP_SLEEP -1
#define VALIDATE_FIRMWARE true
#if defined(ENABLE_TCXO)
#define HAS_TCXO true
#endif
#if MCU_VARIANT == MCU_ESP32
// Board models for ESP32 based builds are
// defined by the build target in the makefile.
// If you are not using make to compile this
// firmware, you can manually define model here.
//
// #define BOARD_MODEL BOARD_GENERIC_ESP32
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_0_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 1024
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define GPS_BAUD_RATE 9600
#define PIN_GPS_TX 12
#define PIN_GPS_RX 34
#if BOARD_MODEL == BOARD_GENERIC_ESP32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_led_rx = 14;
const int pin_led_tx = 32;
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
4, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
39, // pin_dio
36, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_TBEAM
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_PMU true
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_SD false
#define HAS_EEPROM true
#define I2C_SDA 21
#define I2C_SCL 22
#define PMU_IRQ 35
#define INTERFACE_COUNT 1
#define HAS_INPUT true
const int pin_btn_usr1 = 38;
const int pin_led_rx = 2;
const int pin_led_tx = 4;
#if BOARD_VARIANT == MODEL_E4 || BOARD_VARIANT == MODEL_E9
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_VARIANT == MODEL_E3 || BOARD_VARIANT == MODEL_E8
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
true, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
32, // pin_busy
33, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
#elif BOARD_MODEL == BOARD_HUZZAH32
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_led_rx = 14;
const int pin_led_tx = 32;
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
4, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
39, // pin_dio
36, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_LORA32_V1_0
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_cs = 18;
const int pin_reset = 14;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 25;
const int pin_led_tx = 2;
#else
const int pin_led_rx = 2;
const int pin_led_tx = 2;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX1276};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1276
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1276
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
14, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_LORA32_V2_0
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
14, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_LORA32_V2_1
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
#if HAS_TCXO == true
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
true, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
33 // pin_tcxo_enable
}
};
#endif
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 15;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#if HAS_TCXO == false
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
#elif BOARD_MODEL == BOARD_HELTEC32_V2
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
const int pin_btn_usr1 = 0;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 36;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
14, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_HELTEC32_V3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
#define INTERFACE_COUNT 1
const int pin_btn_usr1 = 0;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 13;
const int pin_led_tx = 14;
#else
const int pin_led_rx = 35;
const int pin_led_tx = 35;
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
true, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
8, // pin_ss
9, // pin_sclk
10, // pin_mosi
11, // pin_miso
13, // pin_busy
14, // pin_dio
12, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_RNODE_NG_20
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_NP true
#define HAS_CONSOLE true
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
const int pin_np = 4;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX1276};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1276
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1276
{
8, // pin_ss
9, // pin_sclk
10, // pin_mosi
11, // pin_miso
13, // pin_busy
14, // pin_dio
12, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_RNODE_NG_21
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_PMU true
#define HAS_NP true
#define HAS_SD false
#define HAS_EEPROM true
#define INTERFACE_COUNT 1
const int pin_np = 12;
const int pin_dac = 25;
const int pin_adc = 34;
const int SD_MISO = 2;
const int SD_MOSI = 15;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 12;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#endif
const uint8_t interfaces[INTERFACE_COUNT] = {SX127X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX127X
{
true, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX127X
{
18, // pin_ss
-1, // pin_sclk
-1, // pin_mosi
-1, // pin_miso
-1, // pin_busy
26, // pin_dio
23, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_T3S3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_CONSOLE false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
#define INTERFACE_COUNT 1
// #define PIN_DISP_SLEEP 21
// #define DISP_SLEEP_LEVEL HIGH
const int pin_btn_usr1 = 0;
const int pin_np = 38;
const int pin_dac = 25;
const int pin_adc = 1;
const int SD_MISO = 2;
const int SD_MOSI = 11;
const int SD_CLK = 14;
const int SD_CS = 13;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 37;
const int pin_led_tx = 37;
#endif
#endif
#if BOARD_VARIANT == MODEL_A1
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
7, // pin_ss
5, // pin_sclk
6, // pin_mosi
3, // pin_miso
34, // pin_busy
33, // pin_dio
8, // pin_reset
-1, // pin_txen
-1, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_VARIANT == MODEL_AC // SX1280 with PA
#define CONFIG_UART_BUFFER_SIZE 40000
#define CONFIG_QUEUE_0_SIZE 40000
const uint8_t interfaces[INTERFACE_COUNT] = {SX1280};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1280
{
false, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1280
{
7, // pin_ss
5, // pin_sclk
6, // pin_mosi
3, // pin_miso
36, // pin_busy
9, // pin_dio
8, // pin_reset
10, // pin_txen
21, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
#elif BOARD_MODEL == BOARD_E22_ESP32
#define HAS_DISPLAY true
#define DISPLAY OLED
#define HAS_BLUETOOTH true
#define HAS_BLE true
#define HAS_CONSOLE true
#define HAS_SD false
#define HAS_EEPROM true
#define I2C_SDA 21
#define I2C_SCL 22
#define INTERFACE_COUNT 1
const int pin_led_rx = 2;
const int pin_led_tx = 4;
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
true, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
18, // pin_ss
5, // pin_sclk
27, // pin_mosi
19, // pin_miso
32, // pin_busy
33, // pin_dio
23, // pin_reset
-1, // pin_txen
14, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_MODEL == BOARD_TDECK
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY false
#define HAS_CONSOLE false
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP true
#define PIN_WAKEUP GPIO_NUM_0
#define WAKEUP_LEVEL 0
const int pin_poweron = 10;
const int pin_btn_usr1 = 0;
const int pin_cs = 9;
const int pin_reset = 17;
const int pin_sclk = 40;
const int pin_mosi = 41;
const int pin_miso = 38;
const int pin_tcxo_enable = -1;
const int pin_dio = 45;
const int pin_busy = 13;
const int SD_MISO = 38;
const int SD_MOSI = 41;
const int SD_CLK = 40;
const int SD_CS = 39;
const int DISPLAY_DC = 11;
const int DISPLAY_CS = 12;
const int DISPLAY_MISO = 38;
const int DISPLAY_MOSI = 41;
const int DISPLAY_CLK = 40;
const int DISPLAY_BL_PIN = 42;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
#define IS_ESP32S3 true
#define MODEM SX1262
#define DIO2_AS_RF_SWITCH true
#define HAS_BUSY true
#define HAS_TCXO true
#define HAS_DISPLAY true
#define HAS_CONSOLE true
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_EEPROM true
#define HAS_INPUT true
#define HAS_SLEEP false
#define PMU_IRQ 40
#define I2C_SCL 41
#define I2C_SDA 42
const int pin_btn_usr1 = 0;
const int pin_cs = 10;
const int pin_reset = 5;
const int pin_sclk = 12;
const int pin_mosi = 11;
const int pin_miso = 13;
const int pin_tcxo_enable = -1;
const int pin_dio = 1;
const int pin_busy = 4;
const int SD_MISO = 37;
const int SD_MOSI = 35;
const int SD_CLK = 36;
const int SD_CS = 47;
const int IMU_CS = 34;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#else
const int pin_led_rx = 43;
const int pin_led_tx = 43;
#endif
#endif
#endif
#elif MCU_VARIANT == MCU_NRF52
#if BOARD_MODEL == BOARD_TECHO
#define VALIDATE_FIRMWARE false
#define HAS_INPUT true
//#define GPS_BAUD_RATE 115200
//#define PIN_GPS_TX 41
//#define PIN_GPS_RX 40
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
//#define HAS_EEPROM true
//#define HAS_SD true
#define HAS_DISPLAY true
#define DISPLAY EINK_BW
#define DISPLAY_MODEL GxEPD2_154_D67
//#define HAS_CONSOLE true
//#define HAS_TXCO true
//#define HAS_BLE true
//#define HAS_PMU true
#define CONFIG_UART_BUFFER_SIZE 40000
#define CONFIG_QUEUE_0_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
//#define BLE_MANUFACTURER "LilyGO"
//#define BLE_MODEL "T-Echo"
#define INTERFACE_COUNT 1
//#define I2C_SDA 26
//#define I2C_SCL 27
#define CONFIG_QUEUE_1_SIZE 40000
// first interface in list is the primary
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
}
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
24, // pin_ss
19, // pin_sclk
22, // pin_mosi
23, // pin_miso
17, // pin_busy
20, // pin_dio
25, // pin_reset
-1, // pin_txen
-1, // pin_rxen
21 // pin_tcxo_enable
}
};
const int pin_disp_cs = 30;
const int pin_disp_dc = 28;
const int pin_disp_reset = 2;
const int pin_disp_busy = 3;
const int pin_disp_en = 43;
const int pin_disp_sck = 31;
const int pin_disp_mosi = 29;
const int pin_disp_miso = -1;
#define HAS_BACKLIGHT true
const int pin_btn_usr1 = 42;
const int pin_backlight = 43;
const int pin_led_rx = LED_BLUE;
const int pin_led_tx = LED_RED;
#elif BOARD_MODEL == BOARD_RAK4631 || BOARD_MODEL == BOARD_OPENCOM_XL
#define HAS_EEPROM false
#define HAS_DISPLAY true
#define DISPLAY EINK_BW
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_0_SIZE 6144
#define HAS_INPUT true
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 296
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
#define BLE_MANUFACTURER "RAK Wireless"
#define BLE_MODEL "RAK4640"
#if BOARD_VARIANT == MODEL_11 || BOARD_VARIANT == MODEL_12
#define INTERFACE_COUNT 1
// first interface in list is the primary
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
}
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
42, // pin_ss
43, // pin_sclk
44, // pin_mosi
45, // pin_miso
46, // pin_busy
47, // pin_dio
38, // pin_reset
-1, // pin_txen
37, // pin_rxen
-1 // pin_tcxo_enable
}
};
#elif BOARD_VARIANT == MODEL_13 || BOARD_VARIANT == MODEL_14 || BOARD_VARIANT == MODEL_21
#define INTERFACE_COUNT 2
#define CONFIG_QUEUE_1_SIZE 40000
#define CONFIG_UART_BUFFER_SIZE 40000 // \todo, does it have to be this big?
// first interface in list is the primary
const uint8_t interfaces[INTERFACE_COUNT] = {SX126X, SX128X};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
{
false, // DEFAULT_SPI
true, // HAS_TCXO
true // DIO2_AS_RF_SWITCH
},
// SX1280
{
true, // DEFAULT_SPI
false,// HAS_TCXO
false // DIO2_AS_RF_SWITCH
}
};
const int8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
42, // pin_ss
43, // pin_sclk
44, // pin_mosi
45, // pin_miso
46, // pin_busy
47, // pin_dio
38, // pin_reset
-1, // pin_txen
37, // pin_rxen
-1 // pin_tcxo_enable
},
// SX1280
{
24, // pin_ss
3, // pin_sclk
30, // pin_mosi
29, // pin_miso
25, // pin_busy
15, // pin_dio
16, // pin_reset
20, // pin_txen
19, // pin_rxen
-1 // pin_tcxo_enable
}
};
#endif
const int pin_disp_cs = SS;
const int pin_disp_dc = WB_IO1;
const int pin_disp_reset = -1;
const int pin_disp_busy = WB_IO4;
const int pin_disp_en = WB_IO2;
const int pin_btn_usr1 = 9;
const int pin_led_rx = LED_BLUE;
const int pin_led_tx = LED_GREEN;
#else
#error An unsupported nRF board was selected. Cannot compile RNode firmware.
#endif
#endif
#endif