gitignore added

INSTALL.md

@@ -9,17 +9,72 @@ sudo apt install python3 python3-rpi.gpio python3-spidev aprx screen git python3
 
 Clone this repository.
 
-## Configuration
+## Configuration of APRX
 
-Edit /etc/aprx.conf according to example in aprx/aprx.conf.lora-aprs
+```
+In /etc/aprx.conf:
+
+    <interface>
+        tcp-device   127.0.0.1  10001    KISS
+        callsign     NOCALL-4  # callsign defaults to $mycall
+        tx-ok        true    # transmitter enable defaults to false
+    #   #telem-to-is  true # set to 'false' to disable
+    </interface>
+```
+
+## Start the LoRa KISS TNC
 
-## Start the LoRa KISS TNC and aprx server instance
 ```
 python3 Start_lora-tnc.py &
-sudo aprx
 ```
 
-## Stop the server's
+# Alternative method using the AX.25 stack
+
+This method is more complicated, but also more versitile as not all programs can communicate to a KISS device over TCP.
+
+## Install needed packages
+
 ```
-sudo killall aprx python3
+sudo apt install python3 python3-rpi.gpio python3-spidev aprx screen git python3-pil python3-smbus
 ```
+
+## Checkout the code
+
+Clone this repository.
+
+## Configuration of APRX
+
+```
+In /etc/aprx.conf
+
+    <interface>
+        ax25-device   $mycall
+        tx-ok        true  # transmitter enable defaults to false
+    #   #telem-to-is  true # set to 'false' to disable
+    </interface>
+```
+
+## Install and configure AX.25 stack
+
+```
+sudo apt install socat libax25 ax25-apps ax25-tools
+
+sudo nano /etc/ax25/axports
+
+add:
+   ax0     NOCALL-3        9600    255     2       430.775 MHz LoRa
+```
+
+## Start the LoRa KISS TNC
+
+```
+python3 Start_lora-tnc.py &
+```
+
+## Redirect KISS over TCP to AX.25 device
+
+```
+sudo socat PTY,raw,echo=0,link=/tmp/kisstnc TCP4:127.0.0.1:10001
+sudo kissattach /tmp/kisstnc ax0
+```
+

LoraAprsKissTnc.py

@@ -38,7 +38,7 @@ class LoraAprsKissTnc(LoRa):
 
     # init has LoRa APRS default config settings - might be initialized different when creating object with parameters
     def __init__(self, queue, server, frequency=433.775, preamble=8, spreadingFactor=12, bandwidth=BW.BW125,
-                 codingrate=CODING_RATE.CR4_5, appendSignalReport = True, paSelect = 1, outputPower = 15, verbose=False):
+                 codingrate=CODING_RATE.CR4_5, appendSignalReport = True, paSelect = 1, MaxoutputPower = 15, outputPower = 15, verbose=False):
         # Init SX127x
         BOARD.setup()
 
@@ -56,7 +56,7 @@ class LoraAprsKissTnc(LoRa):
         self.set_coding_rate(codingrate)
         self.set_ocp_trim(100)
 
-        self.set_pa_config(paSelect, outputPower)
+        self.set_pa_config(paSelect, MaxoutputPower, outputPower)
         self.set_max_payload_length(255)
         self.set_dio_mapping([0] * 6)
         self.server = server
@@ -137,4 +137,4 @@ class LoraAprsKissTnc(LoRa):
         try:
             return lora_aprs_frame[delimiter_position + 1]
         except IndexError:
-            return ""
+            return ""

start_all.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+python3 Start_lora-tnc.py &
+sleep 1
+sudo socat PTY,raw,echo=0,link=/tmp/kisstnc TCP4:127.0.0.1:10001 &
+sleep 1
+sudo kissattach /tmp/kisstnc ax0 &