## KISS Settings # Where to listen? # TCP_HOST can be "localhost", "0.0.0.0" or a specific interface address # TCP_PORT as configured in aprx.conf section TCP_HOST = "0.0.0.0" TCP_PORT = 10001 ## AXUDP Settings # AXUDP_REMOTE_IP IP to wich udp packets are sent # AXUDP_REMOTE_PORT UDP Port to wich udp packets are sent # AXUDP_LOCAL_IP IP of Interface to listen on, 0.0.0.0 for all interfaces # AXUDP_LOCAL_PORT Port to listen for incoming AXUDP packets AXUDP_REMOTE_IP = "192.168.0.185" AXUDP_REMOTE_PORT = 20000 AXUDP_LOCAL_IP = "0.0.0.0" AXUDP_LOCAL_PORT = 20000 ## Genral Settings # USE_AXUDP Switch from KISS to AXUDP if True # APPEND_SIGNAL_REPORT adds signal report to text of APRS-Message for debug purpose # this will change the original message and could cause loops USE_AXUDP = False APPEND_SIGNAL_REPORT = False