Custom version of https://github.com/tomelec/RPi-LoRa-KISS-TNC
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
134 lines
4.7 KiB
134 lines
4.7 KiB
""" Defines the BOARD class that contains the board pin mappings and RF module HF/LF info. """
|
|
# -*- coding: utf-8 -*-
|
|
|
|
# Copyright 2015-2018 Mayer Analytics Ltd.
|
|
#
|
|
# This file is part of pySX127x.
|
|
#
|
|
# pySX127x is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public
|
|
# License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later
|
|
# version.
|
|
#
|
|
# pySX127x is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
|
# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
|
|
# details.
|
|
#
|
|
# You can be released from the requirements of the license by obtaining a commercial license. Such a license is
|
|
# mandatory as soon as you develop commercial activities involving pySX127x without disclosing the source code of your
|
|
# own applications, or shipping pySX127x with a closed source product.
|
|
#
|
|
# You should have received a copy of the GNU General Public License along with pySX127. If not, see
|
|
# <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
import RPi.GPIO as GPIO
|
|
import spidev
|
|
|
|
import time
|
|
|
|
|
|
class BOARD:
|
|
""" Board initialisation/teardown and pin configuration is kept here.
|
|
Also, information about the RF module is kept here.
|
|
This is the Raspberry Pi board with one LED and a modtronix inAir9B.
|
|
"""
|
|
# Note that the BCOM numbering for the GPIOs is used.
|
|
DIO0 = 22 # RaspPi GPIO 22
|
|
DIO1 = 23 # RaspPi GPIO 23
|
|
DIO2 = 24 # RaspPi GPIO 24
|
|
DIO3 = 25 # RaspPi GPIO 25
|
|
LED = 18 # RaspPi GPIO 18 connects to the LED on the proto shield
|
|
SWITCH = 4 # RaspPi GPIO 4 connects to a switch
|
|
|
|
# The spi object is kept here
|
|
spi = None
|
|
|
|
# tell pySX127x here whether the attached RF module uses low-band (RF*_LF pins) or high-band (RF*_HF pins).
|
|
# low band (called band 1&2) are 137-175 and 410-525
|
|
# high band (called band 3) is 862-1020
|
|
low_band = True
|
|
|
|
@staticmethod
|
|
def setup():
|
|
""" Configure the Raspberry GPIOs
|
|
:rtype : None
|
|
"""
|
|
GPIO.setmode(GPIO.BCM)
|
|
# LED
|
|
GPIO.setup(BOARD.LED, GPIO.OUT)
|
|
GPIO.output(BOARD.LED, 0)
|
|
# switch
|
|
GPIO.setup(BOARD.SWITCH, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
|
|
# DIOx
|
|
for gpio_pin in [BOARD.DIO0, BOARD.DIO1, BOARD.DIO2, BOARD.DIO3]:
|
|
GPIO.setup(gpio_pin, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
|
|
# blink 2 times to signal the board is set up
|
|
BOARD.blink(.1, 2)
|
|
|
|
@staticmethod
|
|
def teardown():
|
|
""" Cleanup GPIO and SpiDev """
|
|
GPIO.cleanup()
|
|
BOARD.spi.close()
|
|
|
|
@staticmethod
|
|
def SpiDev(spi_bus=0, spi_cs=0):
|
|
""" Init and return the SpiDev object
|
|
:return: SpiDev object
|
|
:param spi_bus: The RPi SPI bus to use: 0 or 1
|
|
:param spi_cs: The RPi SPI chip select to use: 0 or 1
|
|
:rtype: SpiDev
|
|
"""
|
|
BOARD.spi = spidev.SpiDev()
|
|
BOARD.spi.open(spi_bus, spi_cs)
|
|
BOARD.spi.max_speed_hz = 5000000 # SX127x can go up to 10MHz, pick half that to be safe
|
|
return BOARD.spi
|
|
|
|
@staticmethod
|
|
def add_event_detect(dio_number, callback):
|
|
""" Wraps around the GPIO.add_event_detect function
|
|
:param dio_number: DIO pin 0...5
|
|
:param callback: The function to call when the DIO triggers an IRQ.
|
|
:return: None
|
|
"""
|
|
GPIO.add_event_detect(dio_number, GPIO.RISING, callback=callback)
|
|
|
|
@staticmethod
|
|
def add_events(cb_dio0, cb_dio1, cb_dio2, cb_dio3, cb_dio4, cb_dio5, switch_cb=None):
|
|
BOARD.add_event_detect(BOARD.DIO0, callback=cb_dio0)
|
|
BOARD.add_event_detect(BOARD.DIO1, callback=cb_dio1)
|
|
BOARD.add_event_detect(BOARD.DIO2, callback=cb_dio2)
|
|
BOARD.add_event_detect(BOARD.DIO3, callback=cb_dio3)
|
|
# the modtronix inAir9B does not expose DIO4 and DIO5
|
|
if switch_cb is not None:
|
|
GPIO.add_event_detect(BOARD.SWITCH, GPIO.RISING, callback=switch_cb, bouncetime=300)
|
|
|
|
@staticmethod
|
|
def led_on(value=1):
|
|
""" Switch the proto shields LED
|
|
:param value: 0/1 for off/on. Default is 1.
|
|
:return: value
|
|
:rtype : int
|
|
"""
|
|
GPIO.output(BOARD.LED, value)
|
|
return value
|
|
|
|
@staticmethod
|
|
def led_off():
|
|
""" Switch LED off
|
|
:return: 0
|
|
"""
|
|
GPIO.output(BOARD.LED, 0)
|
|
return 0
|
|
|
|
@staticmethod
|
|
def blink(time_sec, n_blink):
|
|
if n_blink == 0:
|
|
return
|
|
BOARD.led_on()
|
|
for i in range(n_blink):
|
|
time.sleep(time_sec)
|
|
BOARD.led_off()
|
|
time.sleep(time_sec)
|
|
BOARD.led_on()
|
|
BOARD.led_off()
|
|
|