marcel
/
RPi-LoRa-KISS-TNC
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2 Commits
1 Branch
1 Tag
705 KiB
 
 
Tag: Branch: Tree: da1a45dad5
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'da1a45dad5'
${ noResults }
RPi-LoRa-KISS-TNC/README.md

1.2 KiB
Raw Blame History

Raspberry Pi LoRa KISS TNC

This project was originally started by Tom Kottek (https://github.com/tomelec/RPi-LoRa-KISS-TNC). Because the program had some problems dealing with digipeated frames (it crashed when receiving a ssid with the 'has_been_digipeated' flag -*- set), I took on the task of fixing the code for my personal use.

Software

The software controls the LoRa transceiver connected to the Raspberry´s SPI bus and emulates a KISS TNC over TCP. That makes it possible to use existing software like APRX. It is also possible to attach the KISS interface to the AX.25 stack via socat/kissattach.

Hardware

I also designed my own (open source) hardware for it: a board holding a Raspberry Pi Zero 2 W, an SX1278 LoRa transceiver and a power supply with on/off button to safely switch on and off the system. The design files can be found on my website: RPi LoRa_shield

To Do

  • The program (or the LoRa module) still crashes occasionally. After restarting the program (kissattach/socat/RPi-LoRa-KISS-TNC.py) it all works again. Need to investigate.
  • Completely remove config.py in favour of RPi-LoRa-KISS-TNC.ini
  • Add raw TCP KISS socket for true AX.25 over KISS