diff --git a/build_doc/aprs_digipeater.html b/build_doc/aprs_digipeater.html
index 24b0b4b..7b2c253 100644
--- a/build_doc/aprs_digipeater.html
+++ b/build_doc/aprs_digipeater.html
@@ -5,8 +5,8 @@
   <meta name="generator" content="pandoc" />
   <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
   <meta name="author" content="M.T. Konstapel" />
-  <meta name="dcterms.date" content="2024-02-14" />
-  <title>APRS digipeater</title>
+  <meta name="dcterms.date" content="2024-02-27" />
+  <title>APRS igate</title>
   <link rel="stylesheet" href="./css/mvp.css" />
 <style type="text/css">
   :root {
@@ -47,10 +47,10 @@
 
       <a href="https://www.meezenest.nl/mees/"><img alt="Logo" src="./images/mees_logo.svg" height="70"></a>
   </nav>
-<h1 class="title">APRS digipeater</h1>
+<h1 class="title">APRS igate</h1>
 <p class="subtitle">with weather and PE1RXF telemetry server</p>
 <p class="author">M.T. Konstapel</p>
-<p class="date">2024-02-14</p>
+<p class="date">2024-02-27</p>
 </header>
 <main>
 <article>
@@ -127,6 +127,17 @@ schematic</figcaption>
 </figure>
 <p><a href="./images/RPi-LoRa-shield_schematic.pdf">PDF version of
 schematic</a></p>
+<p>To make this board work for this build, all the power button stuff
+has to go. That is all the transistors and the surrounding resistors,
+capacitors and diodes. And the 555 timer must also be removed. The RTC
+should be mounted on the bottom of the board instead of the top. After
+that, a Waveshare ethernet/USB hat is sandwiched between the pcb of the
+shield and the Raspberry Pi.</p>
+<figure>
+<img src="./images/eth-usb-hub-hat.jpg"
+title="Waveshare ethernet/USB hat" alt="Waveshare ethernet/USB hat" />
+<figcaption aria-hidden="true">Waveshare ethernet/USB hat</figcaption>
+</figure>
 <h2 id="peripherals">Peripherals</h2>
 <p>The Raspberry Pi needs some extra hardware for interfacing the
 various peripherals, like the transceiver, the ModBus and the Rnode
@@ -188,24 +199,6 @@ what I need.</p>
 alt="LilyGO LoRa32" />
 <figcaption aria-hidden="true">LilyGO LoRa32</figcaption>
 </figure>
-<h2 id="more-than-brains-alone">More than brains alone</h2>
-<p>The Raspberry Pi with all the extra hardware is housed in a small
-plastic housing. On the back panel behind the SMA connectors and the
-power jack, I placed a copper strip. This acts as the star grounding
-strip on which all other ground wires are connected. This prevents a lot
-of RF and EMC problems.</p>
-<figure>
-<img src="./images/raspberry_pi_proto_small.jpg"
-title="Inside the brains" alt="Inside the brains" />
-<figcaption aria-hidden="true">Inside the brains</figcaption>
-</figure>
-<p><a href="./images/raspberry_pi_proto.jpg">Large version of
-photo</a></p>
-<figure>
-<img src="./images/raspberry_pi_proto_backside.jpg" title="Back side"
-alt="Back side" />
-<figcaption aria-hidden="true">Back side</figcaption>
-</figure>
 <h2 id="external-hardware">External hardware</h2>
 <h3 id="meter-transceiver">2 meter transceiver</h3>
 <p>The 2 meter transceiver is an old Alinco DJ-580 hand held radio with
@@ -235,9 +228,22 @@ example).</p>
 <li>Adjust C4 and C5 for the best SWR</li>
 <li>Repeat the two steps, as both ports influence each other</li>
 </ul>
+<h4 id="specifications">Specifications</h4>
+<ul>
+<li>Insertion loss: &lt; 0.2dB</li>
+<li>Port isolaion (2m to 70cm): &gt; 55dB</li>
+<li>Port isolation (70cm to 2m): &gt; 30dB</li>
+<li>Maximum power: 30W</li>
+</ul>
+<figure>
+<img src="./images/diplexer.svg" title="Diplexer schematic"
+alt="Diplexer schematic" />
+<figcaption aria-hidden="true">Diplexer schematic</figcaption>
+</figure>
 <figure>
-<img src="./images/diplexer.svg" title="Diplexer" alt="Diplexer" />
-<figcaption aria-hidden="true">Diplexer</figcaption>
+<img src="./images/diplexer_inside.jpg" title="Diplexer prototype"
+alt="Diplexer prototype" />
+<figcaption aria-hidden="true">Diplexer prototype</figcaption>
 </figure>
 <h3 id="antenna">Antenna</h3>
 <p>This is a simple 2m/70cm dual band antenna from Diamond, the X30.</p>
@@ -246,16 +252,27 @@ example).</p>
 <figcaption aria-hidden="true">Antenna</figcaption>
 </figure>
 <h1 id="the-build">The build</h1>
+<h2 id="hardware">Hardware</h2>
+<p>To make the system easy to handle and somewhat robust, it is
+assembled on a piece of MDF board, which can be bolted in a 19” open
+frame housing.</p>
+<figure>
+<img src="./images/assembled_prototype_annotated.jpg"
+title="Assembled prototype" alt="Assembled prototype" />
+<figcaption aria-hidden="true">Assembled prototype</figcaption>
+</figure>
+<p><a href="./images/assembled_prototype.jpg">Large version of
+photo</a></p>
 <h2 id="software">Software</h2>
 <p>The instalation of all the needed software on the Raspberry Pi is
 complicated, so I wrote a separate document: <a
 href="./installation_pe1rxf_aprs_weather_server.html">installation_pe1rxf_aprs_weather_server.html</a></p>
 <h1 id="the-specifications">The specifications</h1>
 <ul>
-<li>2 meter transceiver with 5 Watt output power</li>
-<li>70 cm LoRa transceiver with 20 dBm output power</li>
+<li>2 meter transceiver with 37dBm (5W) output power</li>
+<li>70 cm LoRa transceiver with 20 dBm (100mW) output power</li>
 <li>Raspberry Pi Zero 2 W</li>
-<li>APRS cross band digipeater software</li>
+<li>APRS igate software</li>
 <li>Weather station via ModBus</li>
 <li>Rnode TCP/IP over 70 cm LoRa for internet</li>
 </ul>
@@ -278,7 +295,7 @@ option) any later version.</p>
 </main>
 <footer>
 <p>&copy;
- 2024-02-14
+ 2024-02-27
  M.T. Konstapel
  <a href="https://meezenest.nl/mees/">https://meezenest.nl/mees/</a>
 </p><p>This work is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-sa/4.0/">Creative Commons Attribution-ShareAlike 4.0 International License</a>.
diff --git a/build_doc/aprs_digipeater.md b/build_doc/aprs_digipeater.md
index d285a08..09ae46f 100644
--- a/build_doc/aprs_digipeater.md
+++ b/build_doc/aprs_digipeater.md
@@ -1,8 +1,8 @@
 ---
-title: APRS digipeater
+title: APRS igate
 subtitle: with weather and PE1RXF telemetry server
 author: M.T. Konstapel
-date: 2024-02-14
+date: 2024-02-27
 website: https://meezenest.nl/mees/
 page_back: https://meezenest.nl/mees/aprs_digipeater.html
 logo: ./images/mees_logo.svg
@@ -45,6 +45,10 @@ Although stand alone in operation, to read the measurements the weather station
 
 [PDF version of schematic](./images/RPi-LoRa-shield_schematic.pdf)
 
+To make this board work for this build, all the power button stuff has to go. That is all the transistors and the surrounding resistors, capacitors and diodes. And the 555 timer must also be removed. The RTC should be mounted on the bottom of the board instead of the top. After that, a Waveshare ethernet/USB hat is sandwiched between the pcb of the shield and the Raspberry Pi.
+
+![Waveshare ethernet/USB hat](./images/eth-usb-hub-hat.jpg "Waveshare ethernet/USB hat")
+
 ## Peripherals
 
 The Raspberry Pi needs some extra hardware for interfacing the various peripherals, like the transceiver, the ModBus and the Rnode modem.
@@ -79,16 +83,6 @@ As a ham, I use the 433 MHz version, of course.
 
 ![LilyGO LoRa32](./images/lilygo-ttgo-lora32.jpg "LilyGO LoRa32")
 
-## More than brains alone
-
-The Raspberry Pi with all the extra hardware is housed in a small plastic housing. On the back panel behind the SMA connectors and the power jack, I placed a copper strip. This acts as the star grounding strip on which all other ground wires are connected. This prevents a lot of RF and EMC problems.
-
-![Inside the brains](./images/raspberry_pi_proto_small.jpg "Inside the brains")
-
-[Large version of photo](./images/raspberry_pi_proto.jpg)
-
-![Back side](./images/raspberry_pi_proto_backside.jpg "Back side")
-
 ## External hardware
 
 ### 2 meter transceiver
@@ -112,8 +106,16 @@ All the inductors are made from 1mm copper wire (preferably silver plated) and w
 - Adjust C4 and C5 for the best SWR
 - Repeat the two steps, as both ports influence each other
 
+#### Specifications
 
-![Diplexer](./images/diplexer.svg "Diplexer")
+- Insertion loss: < 0.2dB
+- Port isolaion (2m to 70cm): > 55dB
+- Port isolation (70cm to 2m): > 30dB
+- Maximum power: 30W
+
+![Diplexer schematic](./images/diplexer.svg "Diplexer schematic")
+
+![Diplexer prototype](./images/diplexer_inside.jpg "Diplexer prototype")
 
 ### Antenna
 
@@ -123,16 +125,25 @@ This is a simple 2m/70cm dual band antenna from Diamond, the X30.
 
 # The build
 
+## Hardware
+
+To make the system easy to handle and somewhat robust, it is assembled on a piece of MDF board, which can be bolted in a 19" open frame housing.
+
+![Assembled prototype](./images/assembled_prototype_annotated.jpg "Assembled prototype")
+
+[Large version of photo](./images/assembled_prototype.jpg)
+
+
 ## Software
 
 The instalation of all the needed software on the Raspberry Pi is complicated, so I wrote a separate document: [installation_pe1rxf_aprs_weather_server.html](./installation_pe1rxf_aprs_weather_server.html)
 
 # The specifications
 
-- 2 meter transceiver with 5 Watt output power
-- 70 cm LoRa transceiver with 20 dBm output power
+- 2 meter transceiver with 37dBm (5W) output power
+- 70 cm LoRa transceiver with 20 dBm (100mW) output power
 - Raspberry Pi Zero 2 W
-- APRS cross band digipeater software
+- APRS igate software
 - Weather station via ModBus
 - Rnode TCP/IP over 70 cm LoRa for internet
 
diff --git a/build_doc/images/assembled_prototype.jpg b/build_doc/images/assembled_prototype.jpg
new file mode 100644
index 0000000..e3a21f6
Binary files /dev/null and b/build_doc/images/assembled_prototype.jpg differ
diff --git a/build_doc/images/assembled_prototype_annotated.jpg b/build_doc/images/assembled_prototype_annotated.jpg
new file mode 100644
index 0000000..bae0644
Binary files /dev/null and b/build_doc/images/assembled_prototype_annotated.jpg differ
diff --git a/build_doc/images/assembled_prototype_annotated.png b/build_doc/images/assembled_prototype_annotated.png
new file mode 100644
index 0000000..c02ba0d
Binary files /dev/null and b/build_doc/images/assembled_prototype_annotated.png differ
diff --git a/build_doc/images/assembled_prototype_small.jpg b/build_doc/images/assembled_prototype_small.jpg
new file mode 100644
index 0000000..f09f851
Binary files /dev/null and b/build_doc/images/assembled_prototype_small.jpg differ
diff --git a/build_doc/images/diplexer_inside.jpg b/build_doc/images/diplexer_inside.jpg
new file mode 100644
index 0000000..726f9e7
Binary files /dev/null and b/build_doc/images/diplexer_inside.jpg differ
diff --git a/build_doc/images/eth-usb-hub-hat.jpg b/build_doc/images/eth-usb-hub-hat.jpg
new file mode 100644
index 0000000..eac31e6
Binary files /dev/null and b/build_doc/images/eth-usb-hub-hat.jpg differ
diff --git a/build_doc/installation_pe1rxf_aprs_weather_server.html b/build_doc/installation_pe1rxf_aprs_weather_server.html
index 4a47f92..3c0b332 100644
--- a/build_doc/installation_pe1rxf_aprs_weather_server.html
+++ b/build_doc/installation_pe1rxf_aprs_weather_server.html
@@ -111,8 +111,8 @@ scan_ssid=1
 ssid=&quot;Your WiFi Name&quot;
 psk=&quot;Your WiFi Password&quot;
 }</code></pre>
-<h3 id="activate-auto-power-off-button">Activate Auto power off
-button</h3>
+<h3 id="activate-auto-power-off-button-obsolete">Activate Auto power off
+button (obsolete)</h3>
 <pre><code>$ nano config.txt</code></pre>
 <p>Add the following text:</p>
 <pre><code>dtoverlay=gpio-poweroff,gpiopin=21,active_low=&quot;y&quot;
@@ -126,7 +126,7 @@ id="insert-the-sd-card-in-the-raspberry-pi-and-press-the-power-button">Insert
 the SD card in the Raspberry Pi and press the power button</h3>
 <p>During the first boot, the Pi will reboot once. Because of the
 external power button, this will not work: the Pi will shutdown. Power
-up the Pi by pressing the external power button again.</p>
+up the Pi by pressing the external power button again. (obsolete)</p>
 <h1 id="the-pi-is-booted-for-the-first-time">The Pi is booted for the
 first time</h1>
 <p>Search for the ip address of the Raspberry Pi (for exammple by
@@ -228,7 +228,10 @@ $ sudo nano /etc/ax25/axports</code></pre>
 <p>add:</p>
 <pre><code>ax0     PE1RXF-1        9600    255     2       144.800 MHz APRS (1200 bps)
 ax1     PE1RXF-3        9600    255     2       433.775 MHz APRS (LORA)</code></pre>
-<h3 id="aprx-software">APRX software</h3>
+<h3
+id="aprx-software-aprx-is-no-longer-needed-as-the-pe1rxf_aprs-software-has-the-same-functionality">APRX
+software (aprx is no longer needed as the pe1rxf_aprs software has the
+same functionality)</h3>
 <pre><code>$ sudo apt-get install aprx
 $ sudo systemctl enable aprx
 
@@ -373,10 +376,13 @@ $ sudo apt install python3-pip</code></pre>
 ~/ham/weather_station/python-ax25:</p>
 <pre><code>$ cd ~/ham/weather_station/python-ax25
 $ sudo ./install.sh</code></pre>
-<p>Install other libraries:</p>
-<pre><code>$ pip3 install minimalmodbus --break-system-packages
-$ pip3 install retrying --break-system-packages
-$ pip3 install pyaml --break-system-packages</code></pre>
+<p>Install other libraries system wide, as the pe1rxf_aprs software has
+to run as root:</p>
+<pre><code>$ sudo pip3 install minimalmodbus --break-system-packages
+$ sudo pip3 install retrying --break-system-packages
+$ sudo pip3 install pyaml --break-system-packages
+$ sudo pip3 install schedule --break-system-packages
+$ sudo pip install aprslib --break-system-packages</code></pre>
 <p>Add /home/marcel/.local/bin to path:</p>
 <pre><code>$ nano .bashrc
 
diff --git a/build_doc/installation_pe1rxf_aprs_weather_server.md b/build_doc/installation_pe1rxf_aprs_weather_server.md
index fff8a8e..48897c6 100644
--- a/build_doc/installation_pe1rxf_aprs_weather_server.md
+++ b/build_doc/installation_pe1rxf_aprs_weather_server.md
@@ -64,7 +64,7 @@ Add the following text:
     psk="Your WiFi Password"
     }
 
-### Activate Auto power off button
+### Activate Auto power off button (obsolete)
 
     $ nano config.txt
 
@@ -78,7 +78,7 @@ When GPIO16 goes low (external button pressed), RPi goes into shutdown.
 
 ### Insert the SD card in the Raspberry Pi and press the power button
 
-During the first boot, the Pi will reboot once. Because of the external power button, this will not work: the Pi will shutdown. Power up the Pi by pressing the external power button again.
+During the first boot, the Pi will reboot once. Because of the external power button, this will not work: the Pi will shutdown. Power up the Pi by pressing the external power button again. (obsolete)
 
 # The Pi is booted for the first time
 
diff --git a/hardware/front_diplexer.odg b/hardware/front_diplexer.odg
new file mode 100644
index 0000000..2995619
Binary files /dev/null and b/hardware/front_diplexer.odg differ