# This is the main configuration file for the PE1RXF APRS digipeater, igate and weather station software
#
# The settings for the PE1RXF telemetry server are configured in file pe1rxf_telemetry.yml
#
# NOTE: At the start, the program randomizes the starting time of every individual periodic transmission,
#       so even if all intervals are equal, the transmissions are not at the same time, but rather spread over time.
#

# This section (ax25) is being depricated
#ax25:
#    call: PE1RXF-13                   # Call from which transmissions are made
#    destination: APZMDM               # APRS destination

#    telemetry_port: ax1               # Linux AX.25 port to which telemetry is sent
#    telemetry_digi_path: 0            # Digipeater path for telemetry messages (0 = no path)
#    telemetry_interval: 5             # Time between telemetry transmissions
#    telemetry_server: PE1RXF-3        # PE1RXF telemetry server call

#    weather_report_port: ax0          # Linux AX.25 port to which telemetry is sent
#    weather_report_digi_path: WIDE2-2 # Digipeater path for weather reports (0 = no path)
#    weather_report_interval: 10       # Time between weather report transmissions

# Global settings
global:
    log-rf: /home/marcel/ham/weather_station/pe1rxf_aprs-rf.log    # Log RF traffic to file (0=no logging)

modbus:
    port: /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0 # USB port to which RS-485 dongle is connected
    address: 14                         # ModBus address of weather station

# APRS-IS section
aprsis:
    call: PE1RXF-1                      # Amateur radio call
    passcode: 19123                     # APRS-IS passcode for the call
    server: euro.aprs2.net              # APRS-IS server to connect to (if set to 0 forwarding to the APRS-IS network is disabled) NOT YET FUNCTIONING
    port: 14580                         # APRS-IS server port
    filter: "b/PE1RXF* g/PE1RXF*"       # APRS-IS incomming feed filter

# APRS weather station section
weather:
    - port: ax0                         # Linux AX.25 port to which APRS weather report is sent
      call: PE1RXF-13                   # Call from which transmissions are made (can be a different call from the call assigned to the AX.25 port)
      destination: APZMDM               # APRS destination
      digi_path: WIDE2-1                # Digipeater path for weather reports (0 = no path)
      position: 5302.76N/00707.85E_     # The position string for the weather station
      interval: 30                      # Time between weather report transmissions (0 = disable)
    - port: ax1
      call: PE1RXF-13
      destination: APZMDM
      digi_path: WIDE2-1
      position: 5302.76N/00707.85E_
      interval: 30
    - port: aprsis
      call: PE1RXF-13
      destination: APZMDM
      digi_path: 0
      position: 5302.76N/00707.85E_
      interval: 10

# APRS beacon section
beacon:
    - port: ax1                         # The AX.25 port on which to transmit (use aprsis for beaconing to the internet via APRS-IS, set to 0 if you want to use the call assigned to the port in /etc/ax25/axports)
      call: PE1RXF-1                    # Call from which transmissions are made (can be a different call from the call assigned to the AX.25 port)
      destination: APZMDM               # APRS destination
      digi_path: WIDE2-1                # Specifie the digipeater path (best practise is to use WIDE2-1, WIDE2-2 or set to 0 for no path)
      position: "!5302.78NR00707.91E&"    # The position string for the beacon (better to put this string between parentheses)
      message: APRS RX iGATE 144.800MHz # The beacon text
      interval: 30                      # Beacon interval in minutes
    - port: ax0
      call: PE1RXF-3
      destination: APZMDM
      digi_path: WIDE2-1
      position: "!5302.78NL00707.91E&"
      message: LoRa APRS RX iGATE 433.775MHz
      interval: 30
    - port: aprsis
      call: PE1RXF-1
      destination: APZMDM
      digi_path: 0
      position: "!5302.78NR00707.91E&"
      message: APRS RX iGATE 144.800MHz
      interval: 10
    - port: aprsis
      call: PE1RXF-3
      destination: APZMDM
      digi_path: 0
      position: "!5302.78NL00707.91E&"
      message: LoRa APRS RX iGATE 433.775MHz
      interval: 10
    - port: aprsis
      call: PE1RXF
      destination: APJ8CL
      digi_path: 0
      position: "=5302.78N/00707.90EG"
      message: JS8 to APRS RX iGate 7.078MHz
      interval: 10