# The settings for the PE1RXF APRS telemetry to MQTT bridge.
# The program does some syntax checking, but not extensively. Be aware that the program may crash when there is an error in this file!
#
# Add APRS nodes under topics. More than one can be defined.

# Global settings apply to all other entries
global:
        broker: mqtt.meezenest.nl           # The MQTT broker we are going to use
        port: 1883                          # The tcp port of the MQTT broker
        topic_root: hamnet_aprs_nodes       # MQTT topic root
        weather_report_interval: 1          # Publish weather report from weather station on ModBus to MQTT broker every x minutes (0=do not publish)

        publish_messages: YES               # The program can forward APRS messages addressed to us to the MQTT broker. If YES: publish APRS messages addressed to call to mqtt broker (/topic_root/aprs_message/).
                                            # If NO: do not publish to mqtt broker
        call: PE1RXF                        # Call used for APRS message publishing to mqtt (if no sufix is given, messages for all sufixes will be forwarded to the mqtt broker)
        blacklist:                          # APRS messages from these calls are not published on the mqtt broker (for examle, place the calls from telemetry nodes here. These messages are processed via the 'topic' entry.
            - PE1RXF-13                     # This way the messages are not also published as plain messages to the mqtt broker.
            - PE1RXF-3
            - PE1RXF-5
            - PE1RXF-6
            - PE1RXF-8
            - PE1RXF-9
topics:
    # MQTT topic: each telemtry node has its own name (sub root) and must be unique
    - name: solar_generator
      # telemetry_file is obsolete. Use call instead.
      #telemetry_file: /home/marcel/ham/aprs_utils/aprs_log/latest_telemetry_PE1RXF-9.dat
      # Call of the telemetry node
      call: PE1RXF-9
      # AX.25 port to listen on (all for all ports)
      ax_port: all
      # Defines the names of the values in the telemetry data. These names are used to publish to the MQTT broker.
      # Make sure the number of descriptions match the number of values in the telemetry data!
      description:
        - soc
        - voltage
        - power
        - temperature
    - name: wx_workshop
      call: PE1RXF-6
      ax_port: all
      description:
        - temperature
        - humidity
    # Definition of the build in weather station telemetry. Set interval in global/weather_report_interval
    - name: weather_station
      call: PE1RXF-13
      ax_port: all
      description:
        - wind_direction
        - wind_speed
        - wind_gust
        - rain_lasthour
        - rain_24hours
        - temperature
        - humidity
        - pressure
        - temperature_backup
        - status_bits
        - luminosity