You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
84 lines
2.2 KiB
84 lines
2.2 KiB
11 months ago
|
/**
|
||
|
|
@file LampDimmer.ino
|
||
|
|
Modbus-Arduino Example - Lamp dimmer (Modbus Serial)
|
||
|
|
Copyright (C) 2023 Pascal JEAN aka epsilonrt
|
||
|
|
https://github.com/epsilonrt/modbus-serial
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <ModbusSerial.h>
|
||
|
|
|
||
|
|
// Used Pins
|
||
|
|
const int LedPin = 3; // Must be PWM output !
|
||
|
|
const int TxenPin = -1; // -1 disables the feature, change that if you are using an RS485 driver, this pin would be connected to the DE and /RE pins of the driver.
|
||
|
|
|
||
|
|
const byte SlaveId = 11; // our Modbus slave address (1-247)
|
||
|
|
// Modbus Registers Offsets (0-9999), PDU adressing ! from the data model we have to add 1
|
||
|
|
const int Lamp1Coil = 0;
|
||
|
|
const int Lamp1Hreg = 0;
|
||
|
|
|
||
|
|
#define MySerial Serial // define serial port used, Serial most of the time, or Serial1, Serial2 ... if available
|
||
|
|
const unsigned long Baudrate = 38400;
|
||
|
|
|
||
|
|
// ModbusSerial object
|
||
|
|
ModbusSerial mb (MySerial, SlaveId, TxenPin);
|
||
|
|
|
||
|
|
// Lamp status variables
|
||
|
|
bool lampOn = true;
|
||
|
|
word lampDimming = 128;
|
||
|
|
|
||
|
|
void setup() {
|
||
|
|
|
||
|
|
MySerial.begin (Baudrate); // works on all boards but the configuration is 8N1 which is incompatible with the MODBUS standard
|
||
|
|
// prefer the line below instead if possible
|
||
|
|
// MySerial.begin (Baudrate, MB_PARITY_EVEN);
|
||
|
|
|
||
|
|
mb.config (Baudrate);
|
||
|
|
mb.setAdditionalServerData ("LDIMMER"); // for Report Server ID function (0x11)
|
||
|
|
|
||
|
|
// Set LedPin
|
||
|
|
pinMode (LedPin, OUTPUT);
|
||
|
|
mb.addCoil (Lamp1Coil, lampOn);
|
||
|
|
mb.addHreg (Lamp1Hreg, lampDimming);
|
||
|
|
|
||
|
|
// The led flashes 20 times to signal the end of setup,
|
||
|
|
// then it is set to its default state.
|
||
|
|
for (int i = 0; i < 20; i++) {
|
||
|
|
|
||
|
|
digitalWrite (LedPin, HIGH);
|
||
|
|
delay (50);
|
||
|
|
digitalWrite (LedPin, LOW);
|
||
|
|
delay (100);
|
||
|
|
}
|
||
|
|
analogWrite (LedPin, (lampOn ? lampDimming : 0));
|
||
|
|
}
|
||
|
|
|
||
|
|
void loop() {
|
||
|
|
|
||
|
|
// Call once inside loop() - all magic here
|
||
|
|
mb.task();
|
||
|
|
|
||
|
|
if (mb.Coil (Lamp1Coil) != lampOn) {
|
||
|
|
// If coil was modified
|
||
|
|
|
||
|
|
lampOn = mb.Coil (Lamp1Coil);
|
||
|
|
if (lampOn) {
|
||
|
|
|
||
|
|
analogWrite (LedPin, lampDimming);
|
||
|
|
}
|
||
|
|
else {
|
||
|
|
|
||
|
|
analogWrite (LedPin, 0);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
if ( (mb.Hreg (Lamp1Hreg) & 0x00FF) != lampDimming) {
|
||
|
|
// If holding register was modified (only LSB will used)
|
||
|
|
|
||
|
|
lampDimming = (mb.Hreg (Lamp1Hreg) & 0x00FF);
|
||
|
|
if (lampOn) {
|
||
|
|
|
||
|
|
analogWrite (LedPin, lampDimming);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|