You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
47 lines
1.4 KiB
47 lines
1.4 KiB
/**
|
|
@file Lamp.ino
|
|
Modbus-Arduino Example - Lamp (Modbus Serial)
|
|
Copyright (C) 2023 Pascal JEAN aka epsilonrt
|
|
Copyright (C) 2014 André Sarmento Barbosa
|
|
https://github.com/epsilonrt/modbus-serial
|
|
*/
|
|
|
|
#include <ModbusSerial.h>
|
|
|
|
// Used Pins
|
|
const int LedPin = 13; // Change that to match your led
|
|
const int TxenPin = -1; // -1 disables the feature, change that if you are using an RS485 driver, this pin would be connected to the DE and /RE pins of the driver.
|
|
|
|
const byte SlaveId = 10;
|
|
// Modbus Registers Offsets (0-9999)
|
|
const int Lamp1Coil = 0;
|
|
|
|
#define MySerial Serial // define serial port used, Serial most of the time, or Serial1, Serial2 ... if available
|
|
const unsigned long Baudrate = 38400;
|
|
|
|
// ModbusSerial object
|
|
ModbusSerial mb (MySerial, SlaveId, TxenPin);
|
|
|
|
void setup() {
|
|
|
|
MySerial.begin (Baudrate); // works on all boards but the configuration is 8N1 which is incompatible with the MODBUS standard
|
|
// prefer the line below instead if possible
|
|
// MySerial.begin (Baudrate, MB_PARITY_EVEN);
|
|
|
|
mb.config (Baudrate);
|
|
mb.setAdditionalServerData ("LAMP"); // for Report Server ID function (0x11)
|
|
|
|
// Set LedPin mode
|
|
pinMode (LedPin, OUTPUT);
|
|
// Add Lamp1Coil register - Use addCoil() for digital outputs
|
|
mb.addCoil (Lamp1Coil);
|
|
}
|
|
|
|
void loop() {
|
|
|
|
// Call once inside loop() - all magic here
|
|
mb.task();
|
|
|
|
// Attach LedPin to Lamp1Coil register
|
|
digitalWrite (LedPin, mb.Coil (Lamp1Coil));
|
|
}
|
|
|