marcel
/
RNode_Firmware_CE
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 't3s3_sx1280'

Browse Source
master
jacob.eva 7 months ago
parent c88fe0ed33 fee8d2b28b
commit 282815eb95
No known key found for this signature in database
GPG Key ID: B92E083BBCCAA1E
7 changed files with 162 additions and 58 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 22
      Boards.h
  2. 4
      Display.h
  3. 7
      Makefile
  4. 4
      RNode_Firmware_CE.ino
  5. 2
      ROM.h
  6. 109
      Radio.cpp
  7. 14
      Utilities.h

22
Boards.h
Unescape View File

@ -14,6 +14,7 @@
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#include "Interfaces.h"
#include "ROM.h"
#ifndef BOARDS_H
#define BOARDS_H
@ -24,6 +25,7 @@
#define MCU_ESP32 0x81
#define MCU_NRF52 0x71
// Boards
#define BOARD_RNODE 0x31
#define BOARD_HMBRW 0x32
#define BOARD_TBEAM 0x33
@ -36,10 +38,11 @@
#define BOARD_HELTEC32_V3 0x3A
#define BOARD_RNODE_NG_20 0x40
#define BOARD_RNODE_NG_21 0x41
#define BOARD_RNODE_NG_22 0x42
#define BOARD_T3S3 0x42
#define BOARD_GENERIC_NRF52 0x50
#define BOARD_RAK4631 0x51
// Displays
#define OLED 0x01
#define EINK_BW 0x02
#define EINK_3C 0x03
@ -545,7 +548,7 @@
}
};
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#elif BOARD_MODEL == BOARD_T3S3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
@ -585,7 +588,7 @@
#endif
#endif
#if BOARD_VARIANT == MODEL_A1
const uint8_t interfaces[INTERFACE_COUNT] = {SX1262};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1262
@ -595,6 +598,17 @@
true // DIO2_AS_RF_SWITCH
},
};
#elif BOARD_VARIANT == MODEL_A5 // SX1280 with PA
const uint8_t interfaces[INTERFACE_COUNT] = {SX1280};
const bool interface_cfg[INTERFACE_COUNT][3] = {
// SX1280
{
false, // DEFAULT_SPI
false, // HAS_TCXO
false // DIO2_AS_RF_SWITCH
},
};
#endif
const uint8_t interface_pins[INTERFACE_COUNT][10] = {
// SX1262
{
@ -610,7 +624,6 @@
-1 // pin_tcxo_enable
}
};
#else
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
#endif
@ -689,6 +702,7 @@
#endif
#ifndef INTERFACE_SPI
// INTERFACE_SPI is only required on NRF52 platforms, as the SPI pins are set in the class constructor and not by a setter method.
// Even if custom SPI interfaces are not needed, the array must exist to prevent compilation errors.
#define INTERFACE_SPI
const SPIClass interface_spi[1];

4
Display.h
Unescape View File

@ -68,7 +68,7 @@ void busyCallback(const void* p) {
#define DISP_RST -1
#define DISP_ADDR 0x3C
#endif
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#elif BOARD_MODEL == BOARD_T3S3
#if DISPLAY == OLED
#define DISP_RST 21
#define DISP_ADDR 0x3C
@ -200,7 +200,7 @@ bool display_init() {
digitalWrite(pin_display_en, LOW);
delay(50);
digitalWrite(pin_display_en, HIGH);
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#elif BOARD_MODEL == BOARD_T3S3
Wire.begin(SDA_OLED, SCL_OLED);
#elif BOARD_MODEL == BOARD_HELTEC32_V2
Wire.begin(SDA_OLED, SCL_OLED);

7
Makefile
Unescape View File

@ -71,8 +71,11 @@ firmware-tbeam:
firmware-tbeam_sx126x:
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
firmware-t3s3:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
firmware-t3s3_sx1262:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA1\""
firmware-t3s3_sx1280_pa:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DBOARD_VARIANT=0xA5\""
firmware-lora32_v10:
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""

4
RNode_Firmware_CE.ino
Unescape View File

@ -87,7 +87,7 @@ void setup() {
Serial.begin(serial_baudrate);
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_RNODE_NG_22
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_T3S3
// Some boards need to wait until the hardware UART is set up before booting
// the full firmware. In the case of the RAK4631, the line below will wait
// until a serial connection is actually established with a master. Thus, it
@ -1283,7 +1283,7 @@ void process_serial() {
void sleep_now() {
#if HAS_SLEEP == true
#if BOARD_MODEL == BOARD_RNODE_NG_22
#if BOARD_MODEL == BOARD_T3S3
display_intensity = 0;
update_display(true);
#endif

2
ROM.h
Unescape View File

@ -30,8 +30,10 @@
#define PRODUCT_FREENODE 0x20
#define MODEL_11 0x11
#define MODEL_12 0x12
#define MODEL_13 0x13 // RAK4631 with WisBlock SX1280 module (LIBSYS002)
#define MODEL_21 0x21 // European band, 868MHz
#define MODEL_A1 0xA1
#define MODEL_A5 0xA5 // T3S3 SX1280 PA
#define MODEL_A6 0xA6
#define MODEL_A4 0xA4
#define MODEL_A9 0xA9

109
Radio.cpp
Unescape View File

@ -735,7 +735,7 @@ void sx126x::enableTCXO() {
uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF};
#elif BOARD_MODEL == BOARD_TBEAM
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#elif BOARD_MODEL == BOARD_T3S3
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
#else
uint8_t buf[4] = {0};
@ -2192,9 +2192,9 @@ void sx128x::disableTCXO() {
}
void sx128x::setTxPower(int level, int outputPin) {
// PA calculation currently only works for the LoRa1280F27. Support for
// other assemblies would be appreciated in a PR.
if (outputPin == PA_OUTPUT_PA_BOOST_PIN) {
uint8_t tx_buf[2];
#if BOARD_VARIANT == MODEL_13
// RAK4631 with WisBlock SX1280 module (LIBSYS002)
if (level > 27) {
level = 27;
} else if (level < 0) {
@ -2290,32 +2290,113 @@ void sx128x::setTxPower(int level, int outputPin) {
case 27:
reg_value = 13;
break;
default:
reg_value = 0;
break;
}
uint8_t tx_buf[2];
tx_buf[0] = reg_value;
tx_buf[1] = 0xE0; // ramping time - 20 microseconds
executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2);
} else {
#elif BOARD_VARIANT == MODEL_A5
// T3S3 SX1280 PA
if (level > 20) {
level = 20;
} else if (level < 0) {
level = 0;
}
_txp = level;
int reg_value;
switch (level) {
/*case 0:
reg_value = -18;
break;
case 1:
reg_value = -17;
break;
case 2:
reg_value = -16;
break;
case 3:
reg_value = -15;
break;
case 4:
reg_value = -14;
break;
case 5:
reg_value = -13;
break;
case 6:
reg_value = -12;
break;
case 7:
reg_value = -10;
break;
case 8:
reg_value = -9;
break;
case 9:
reg_value = -8;
break;
case 10:
reg_value = -7;
break;
case 11:
reg_value = -6;
break;
case 12:
reg_value = -5;
break;
case 13:
reg_value = -4;
break;
case 14:
reg_value = -3;
break;
case 15:
reg_value = -2;
break;
case 16:
reg_value = -1;
break;
case 17:
reg_value = 0;
break;
case 18:
reg_value = 1;
break;
case 19:
reg_value = 2;
break;*/
case 20:
reg_value = 3;
break;
default:
reg_value = 0;
break;
}
tx_buf[0] = level;
tx_buf[1] = 0xE0; // ramping time - 20 microseconds
#else
// For SX1280 boards with no specific PA requirements
if (level > 13) {
level = 13;
} else if (level < -18) {
level = -18;
}
_txp = level;
level = level + 18;
uint8_t tx_buf[2];
_txp = level;
tx_buf[0] = level;
tx_buf[1] = 0xE0; // ramping time - 20 microseconds
#endif
executeOpcode(OP_TX_PARAMS_8X, tx_buf, 2);
}
}
uint8_t sx128x::getTxPower() {

14
Utilities.h
Unescape View File

@ -65,9 +65,9 @@ uint8_t eeprom_read(uint32_t mapped_addr);
#if BOARD_MODEL == BOARD_HELTEC32_V3
//https://github.com/espressif/esp-idf/issues/8855
#include "hal/wdt_hal.h"
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#elif BOARD_MODEL == BOARD_T3S3
#include "hal/wdt_hal.h"
#else BOARD_MODEL != BOARD_RNODE_NG_22
#else BOARD_MODEL != BOARD_T3S3
#include "soc/rtc_wdt.h"
#endif
#define ISR_VECT IRAM_ATTR
@ -137,7 +137,7 @@ uint8_t boot_vector = 0x00;
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
#elif BOARD_MODEL == BOARD_RNODE_NG_22
#elif BOARD_MODEL == BOARD_T3S3
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
@ -965,6 +965,9 @@ void set_implicit_length(uint8_t len) {
}
void setTXPower(RadioInterface* radio, int txp) {
// Todo, revamp this function. The current parameters for setTxPower are
// suboptimal, as some chips have power amplifiers which means that the max
// dBm is not always the same.
if (model == MODEL_11) {
if (interfaces[radio->getIndex()] == SX128X) {
radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
@ -992,6 +995,7 @@ void setTXPower(RadioInterface* radio, int txp) {
if (model == MODEL_A2) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
if (model == MODEL_A3) radio->setTxPower(txp, PA_OUTPUT_RFO_PIN);
if (model == MODEL_A4) radio->setTxPower(txp, PA_OUTPUT_RFO_PIN);
if (model == MODEL_A5) radio->setTxPower(txp, PA_OUTPUT_RFO_PIN);
if (model == MODEL_A6) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
if (model == MODEL_A7) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
if (model == MODEL_A8) radio->setTxPower(txp, PA_OUTPUT_PA_BOOST_PIN);
@ -1340,8 +1344,8 @@ bool eeprom_model_valid() {
if (model == MODEL_A3 || model == MODEL_A8) {
#elif BOARD_MODEL == BOARD_RNODE_NG_21
if (model == MODEL_A2 || model == MODEL_A7) {
#elif BOARD_MODEL == BOARD_RNODE_NG_22
if (model == MODEL_A1 || model == MODEL_A6) {
#elif BOARD_MODEL == BOARD_T3S3
if (model == MODEL_A1 || model == MODEL_A5 || model == MODEL_A6) {
#elif BOARD_MODEL == BOARD_HMBRW
if (model == MODEL_FF || model == MODEL_FE) {
#elif BOARD_MODEL == BOARD_TBEAM

Write Preview
Loading…
Cancel
Save