You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
76 lines
2.1 KiB
76 lines
2.1 KiB
# Changelog
|
|
|
|
For the changed made by Mees Electronics.
|
|
|
|
All notable changes to this project will be documented in this file.
|
|
|
|
Added : for new features.
|
|
Changed : for changes in existing functionality.
|
|
Deprecated: for soon-to-be removed features.
|
|
Removed : for now removed features.
|
|
Fixed : for any bug fixes.
|
|
Security : in case of vulnerabilities.
|
|
|
|
### 2025-03-10
|
|
|
|
#### Changed
|
|
|
|
Renamed BOARD_WAVESHARE_ESP32_S3_PICO to MEES_ESP32_S3 in source code. Also renamed firmware-waveshare-esp32-s3-pico to firmware-mees-esp32-s3, upload-waveshare-esp32-s3-pico to upload-mees-esp32-s3 and release-waveshare-esp32-s3-pico to release-mees-esp32-s3. This way it is obvious the firmware works for all generic ESP32 S3 boards.
|
|
|
|
#### Added
|
|
|
|
Two BOARD_VARIANTs: 0xF1 for SX1278 and 0xF2 for SX1268. Can be chosen during compile time.
|
|
|
|
### 2025-03-03
|
|
|
|
Final pinout of LoRa module defined. Should work on most ESP32-S3 development boards.
|
|
|
|
|pin|GPIO|
|
|
|---|----|
|
|
|NSS|10|
|
|
|MOSI|11|
|
|
|SCK|12|
|
|
|MISO|13|
|
|
|RST|14|
|
|
|DIO|15|
|
|
|BUSY|16|
|
|
|RX LED|17|
|
|
|TX LED|18|
|
|
|
|
### 2025-02-28
|
|
|
|
Started all over again. This time I succeeded! The Waveshare ESP32 S3 Pico and the Ra-02 SX1278 LoRa transceiver are working as a proper rnode. It took me some time, but now I am happy. See Documentation/HOWTO-change-firmware-and-compile-it_MeesElectronics.md for more information about adding a new board to the code.
|
|
|
|
Pinout Ra-02:
|
|
|
|
|pin|GPIO|
|
|
|---|----|
|
|
|NSS|39|
|
|
|MOSI|37|
|
|
|MISO|36|
|
|
|SCK|38|
|
|
|RST|40|
|
|
|DIO|35|
|
|
|
|
But pinout can easily be mapped to other pins.
|
|
|
|
## 2025-02-24
|
|
|
|
Added new board (Waveshare ESP32-S3 Pico) to source code.
|
|
|
|
Pinout Ra-02 LoRa transceiver:
|
|
|
|
|pin|GPIO|
|
|
|---|----|
|
|
|NSS|10|
|
|
|MOSI|11|
|
|
|MISO|13|
|
|
|SCK|12|
|
|
|RST|14|
|
|
|DIO|15|
|
|
|
|
Can compile the source (with "make firmware-waveshare-esp32-s3-pico") and upload the program to ESP32 (with "make upload-waveshare-esp32-s3-pico"). According to the oscilloscope the SPI bus works. Reticulum still gives errors: "TX power mismatch" and "Radio state mismatch". RGB LED works, so Reticulum seems to communicate with the rnode.
|
|
|
|
## [1.74] - 2025-02-17
|
|
|
|
Version from https://github.com/liberatedsystems/RNode_Firmware_CE
|
|
|