You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
112 lines
2.8 KiB
112 lines
2.8 KiB
11 months ago
|
/*
|
||
|
|
ModbusSerial.h - Header for ModbusSerial Library
|
||
|
|
Copyright (C) 2023 Pascal JEAN aka epsilonrt
|
||
|
|
Copyright (C) 2014 André Sarmento Barbosa
|
||
|
|
*/
|
||
|
|
#include <Arduino.h>
|
||
|
|
#include <Modbus.h>
|
||
|
|
|
||
|
|
#pragma once
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @enum MB_PARITY
|
||
|
|
* @brief Parity
|
||
|
|
*
|
||
|
|
* See paragraph [2.5.1 RTU Transmission Mode] from
|
||
|
|
* MODBUS over serial line specification and implementation guide V1.02
|
||
|
|
* http://www.modbus.org/docs/Modbus_over_serial_line_V1_02.pdf
|
||
|
|
*
|
||
|
|
* The format (11 bits) for each byte in RTU mode is :
|
||
|
|
* Coding System:
|
||
|
|
*
|
||
|
|
* * 8–bit binary
|
||
|
|
*
|
||
|
|
* Bits per Byte:
|
||
|
|
*
|
||
|
|
* * 1 start bit
|
||
|
|
* * 8 data bits, least significant bit sent first
|
||
|
|
* * 1 bit for parity completion
|
||
|
|
* * 1 stop bit
|
||
|
|
* .
|
||
|
|
*
|
||
|
|
* Even parity is required, other modes ( odd parity, no parity )
|
||
|
|
* may also be used. In order to ensure a maximum compatibility with
|
||
|
|
* other products, it is recommended to support also No parity mode.
|
||
|
|
* The default parity mode must be even parity.
|
||
|
|
* Remark : the use of no parity requires 2 stop bits.
|
||
|
|
*/
|
||
|
|
enum MB_PARITY {
|
||
|
|
MB_PARITY_NONE = SERIAL_8N2, ///< No parity
|
||
|
|
MB_PARITY_EVEN = SERIAL_8E1, ///< Even parity
|
||
|
|
MB_PARITY_ODD = SERIAL_8O1 ///< Odd parity
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @class ModbusSerial
|
||
|
|
* @brief Modbus over serial line Class
|
||
|
|
*/
|
||
|
|
class ModbusSerial : public Modbus {
|
||
|
|
|
||
|
|
public:
|
||
|
|
/**
|
||
|
|
* @brief Constructor
|
||
|
|
* @param port serial port to use
|
||
|
|
* @param txenPin if an RS485 circuit is used, this corresponds to the
|
||
|
|
* pin number connected to the transmit enable (DE) and receive disable (/RE) pin.
|
||
|
|
* -1 if not used.
|
||
|
|
*/
|
||
|
|
ModbusSerial (Stream & port, byte slaveId, int txenPin = -1);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Configure ModbusSerial object
|
||
|
|
*
|
||
|
|
* configures txenPin on output if necessary and calculates the times of the RTU frame.
|
||
|
|
*
|
||
|
|
* @warning the \c begin() function of the serial port passed to the constructor
|
||
|
|
* must be called **BEFORE** calling this function.
|
||
|
|
*
|
||
|
|
* @param baud baudrate in accordance with that used by the serial port
|
||
|
|
*/
|
||
|
|
void config (unsigned long baud);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Task that performs all operations on MODBUS
|
||
|
|
*
|
||
|
|
* Call once inside loop(), all magic here !
|
||
|
|
*/
|
||
|
|
void task();
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Change the value of slave identifier
|
||
|
|
* @param slaveId identifier 1-247
|
||
|
|
*/
|
||
|
|
void setSlaveId (byte slaveId);
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Return slave identifier
|
||
|
|
*/
|
||
|
|
byte getSlaveId();
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Broadcast address
|
||
|
|
*/
|
||
|
|
static const byte BroadcastAddress = 0;
|
||
|
|
|
||
|
|
protected:
|
||
|
|
bool receive (byte * frame);
|
||
|
|
bool sendPDU (byte * pduframe);
|
||
|
|
bool send (byte * frame);
|
||
|
|
void reportServerId();
|
||
|
|
|
||
|
|
private:
|
||
|
|
Stream * m_stream;
|
||
|
|
int m_txenPin;
|
||
|
|
byte m_slaveId;
|
||
|
|
|
||
|
|
unsigned int m_t15; // inter character time out (us)
|
||
|
|
unsigned int m_t35; // frame delay (us)
|
||
|
|
|
||
|
|
private:
|
||
|
|
word calcCrc (byte address, byte * pduframe, byte pdulen);
|
||
|
|
};
|