marcel
/
RNode_Firmware_CE
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Release section Makefile cleaned up, HOWTO updated.

Browse Source
master
Marcel 10 hours ago
parent a8e5ed5067
commit e6277be9e6
3 changed files with 66 additions and 12 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Boards.h
  2. 55
      Documentation/HOWTO-change-firmware-and-compile-it_MeesElectronics.md
  3. 21
      Makefile

2
Boards.h
Unescape View File

@ -1044,7 +1044,7 @@
const int pin_btn_usr1 = 0; const int pin_btn_usr1 = 0;
#define HAS_NP true #define HAS_NP false
const int pin_np = 21; const int pin_np = 21;
#if HAS_NP == false #if HAS_NP == false
#if defined(EXTERNAL_LEDS) #if defined(EXTERNAL_LEDS)

55
Documentation/HOWTO-change-firmware-and-compile-it_MeesElectronics.md
Unescape View File

@ -228,7 +228,60 @@ This will end with error 'This device has not been provisioned yet, cannot set f
### Migrating to a other system ### Migrating to a other system
When the rnode is flashed, it is signed with a key. If you conect the rnode to another system, this key cannot be validated. It is possible to write a new key to the rnode by erasing the eeprom and writing the local key to it. When the rnode is flashed, it is signed with a key. If you connect the rnode to another system, this key cannot be validated. It is possible to write a new key to the rnode by erasing the eeprom and writing the local key to it.
$ rnodeconf /dev/ttyACM0 --eeprom-wipe $ rnodeconf /dev/ttyACM0 --eeprom-wipe
$ rnodeconf /dev/ttyACM0 -r --platform ESP32 --model a4 --product f0 --hwrev 3 $ rnodeconf /dev/ttyACM0 -r --platform ESP32 --model a4 --product f0 --hwrev 3
### And then it did not work...
After I had successfully flashed the board I started reticulum:
$ rnsd -vvv
It found the rnode, but it could not initialize the radio. It gave the following error:
[2025-02-25 10:00:56] [Notice] Serial port /dev/ttyACM0 is now open
[2025-02-25 10:00:56] [Verbose] Configuring RNode interface...
[2025-02-25 10:00:56] [Verbose] Waiting for radio configuration validation for RNodeInterface[RNode LoRa Interface]...
[2025-02-25 10:00:56] [Debug] RNodeInterface[RNode LoRa Interface] Radio reporting frequency is 434.5 MHz
[2025-02-25 10:00:56] [Debug] RNodeInterface[RNode LoRa Interface] Radio reporting bandwidth is 250.0 KHz
[2025-02-25 10:00:56] [Debug] RNodeInterface[RNode LoRa Interface] Radio reporting TX power is 0 dBm
[2025-02-25 10:00:56] [Debug] RNodeInterface[RNode LoRa Interface] Radio reporting spreading factor is 10
[2025-02-25 10:00:56] [Debug] RNodeInterface[RNode LoRa Interface] Radio reporting coding rate is 8
[2025-02-25 10:00:56] [Verbose] RNodeInterface[RNode LoRa Interface] On-air bitrate is now 1.22 kbps
[2025-02-25 10:00:56] [Debug] RNodeInterface[RNode LoRa Interface] Radio reporting state is offline
[2025-02-25 10:00:56] [Error] TX power mismatch
[2025-02-25 10:00:56] [Error] Radio state mismatch
[2025-02-25 10:00:56] [Error] After configuring RNodeInterface[RNode LoRa Interface], the reported radio parameters did not match your configuration.
[2025-02-25 10:00:56] [Error] Make sure that your hardware actually supports the parameters specified in the configuration
[2025-02-25 10:00:56] [Error] Aborting RNode startup
I checked the SPI communication with an oscilloscope and that all seemed to be working. I could find the problem. Than I remembered the second serial interface on the Waveshare board. This interface was available on the USB port via the onboard USB hub. Maybe the rnode spits out some sort of debug information. So I installed *screen* on my pc and started it:
$ screen /dev/ttyACM1 115200
And sure enough, I saw som useful information scrolling across my screen:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x2b (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x4bc
load:0x403c9700,len:0xbd8
load:0x403cc700,len:0x2a0c
entry 0x403c98d0
E (309) gpio: gpio_set_level(227): GPIO output gpio_num error
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x2b (SPI_FAST_FLASH_BOOT)
Saved PC:0x420f917e
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x4bc
load:0x403c9700,len:0xbd8
load:0x403cc700,len:0x2a0c
entry 0x403c98d0
E (309) gpio: gpio_set_level(227): GPIO output gpio_num error

21
Makefile
Unescape View File

@ -153,7 +153,7 @@ firmware-heltec_t114:
# Added board from Mees Electronics # Added board from Mees Electronics
firmware-waveshare-esp32-s3-pico: check_bt_buffers firmware-waveshare-esp32-s3-pico: check_bt_buffers
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x61\"" arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x61\" \"-DEXTERNAL_LEDS=true\""
upload-tbeam: upload-tbeam:
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:t-beam arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:t-beam
@ -270,11 +270,11 @@ upload-techo:
# Added board from Mees Electronics # Added board from Mees Electronics
upload-waveshare-esp32-s3-pico: upload-waveshare-esp32-s3-pico:
arduino-cli upload -p $(or $(port), /dev/ttyACM0) --fqbn esp32:esp32:esp32s3 arduino-cli upload -p $(or $(port), /dev/ttyACM1) --fqbn esp32:esp32:esp32s3
@sleep 1 @sleep 1
rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin) python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM1) --chip esp32-s3 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
@sleep 3 @sleep 3
python3 ./Release/esptool/esptool.py --port $(or $(port), /dev/ttyACM0) --chip esp32-s3 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin rnodeconf $(or $(port), /dev/ttyACM0) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin)
release: console-site spiffs-image $(shell grep ^release- Makefile | cut -d: -f1) release: console-site spiffs-image $(shell grep ^release- Makefile | cut -d: -f1)
@ -519,10 +519,11 @@ release-heltec_t114:
# Added by Mees Electronics # Added by Mees Electronics
release-waveshare-esp32-s3-pico: check_bt_buffers release-waveshare-esp32-s3-pico: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x61\"" arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" $(COMMON_BUILD_FLAGS) --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x61\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bin build/rnode_firmware_lora32v21.bin cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/ rnode_firmware_waveshare-esp32-s3-pico.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bin build/ rnode_firmware_waveshare-esp32-s3-pico.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware_CE.ino.partitions.bin build/rnode_firmware_lora32v21.partitions cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.bootloader.bin build/ rnode_firmware_waveshare-esp32-s3-pico.bootloader
zip --junk-paths ./Release/rnode_firmware_lora32v21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions cp build/esp32.esp32.esp32s3/RNode_Firmware_CE.ino.partitions.bin build/ rnode_firmware_waveshare-esp32-s3-pico.partitions
zip --junk-paths ./Release/ rnode_firmware_waveshare-esp32-s3-pico.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/ rnode_firmware_waveshare-esp32-s3-pico.boot_app0 build/ rnode_firmware_waveshare-esp32-s3-pico.bin build/ rnode_firmware_waveshare-esp32-s3-pico.bootloader build/ rnode_firmware_waveshare-esp32-s3-pico.partitions
rm -r build rm -r build

Write Preview
Loading…
Cancel
Save